Help for Rocket IPTV Server.
with built in buzz tv app you can use Mac, username/password, and m3u as well as can be played via many different ways by using third party softwares. 
to add....
buzz 4000
buzz 4500
buzz essentials2
buzz vidstick
buzz 4900
Those buzz boxes can connect using 3 different methods.
MAC -- you would need to attach the Buzz's MAC to your Rocket code, This would be similar to your Mag receiver. Server's EPG in use.
XC API -- no MAC needed. Enter Server URL and enter username and password in the server setup. Server's EPG in use.
M3u Playlist -- no MAC needed. Enter Server Playlist URL in the server setup. Enter 3rd party EPG URL.
The 4900 model can also use a hardcopy of the m3u playlist, while the others can use only the PLaylist URL
http://iptvtalk.net/showthread.php?45290-BuzzTV-Essentials-e2-Server-Setups
note...
That mag box is quite outdated but by changing boxes will not garantie to stop the freezing. It depends on why there is freezing to begin with.
buzz 4000
buzz 4500
buzz essentials2
buzz vidstick
buzz 4900
Those buzz boxes can connect using 3 different methods.
MAC -- you would need to attach the Buzz's MAC to your Rocket code, This would be similar to your Mag receiver. Server's EPG in use.
XC API -- no MAC needed. Enter Server URL and enter username and password in the server setup. Server's EPG in use.
M3u Playlist -- no MAC needed. Enter Server Playlist URL in the server setup. Enter 3rd party EPG URL.
The 4900 model can also use a hardcopy of the m3u playlist, while the others can use only the PLaylist URL
http://iptvtalk.net/showthread.php?45290-BuzzTV-Essentials-e2-Server-Setups
note...
That mag box is quite outdated but by changing boxes will not garantie to stop the freezing. It depends on why there is freezing to begin with.
Last edited:
Who told you the XR 4000 was discontinued?As for the MAG 254 or 310 awesome box for a server connection no problems on rocket
But no apps etc so your restricted
Buzz
3000
E1- cheap box !!! Works well
Xr 4000 unreal but discontinued
Xr4500 unreal fast
Xrs 4900 unbelievable box
if you never had any issue then theres no need to but it won't hurt if you want to use vpn.
follow this. you are not going to get any easier than this
http://iptvtalk.net/showthread.php?42607-BuzzTV-XR4500-XRS4500-some-setup-instruction
and just incase you dont want to read the whole thing
c/p crazed 9.6
Launcher screen > Server Settings > Sever Line > Add Server.
Enter thru the onscreen Keyboard (KB) a favorite name to name your Portal. It can be any name you want, keep it short and sweet.
After the name has been entered, either press the Back button on your RCU and scroll down to the next slot and then press enter again to bring up the KB.
Or that blueish greenish colored key on the KB brings you to the next slot as well.
The Portal URL is next to be entered and you will notice that the BuzzTV4 app already has the http:// prefix entered for you, so follow that up with your server URL.
Next we would leave the User Credentials box un-checked and scroll down to Connect, but do not press on it yet.
First thing we need to do is visit the Server website and log onto your code and enter the MAC ID onto your code.
The MAC ID you want is shown as 'Server ID' and is seen in the top right hand corner of that same onscreen Server setup menu.
There will be two MAC Addresses/IDs shown there.
Top one is shown as the MAC Address and bottom one is shown as the Server ID
The one to add to the server is the Server ID
You will notice that both of those end with the same 6 digits , while the first 6 digits are different.
The Server ID starts with 00:1a:79 and is the correct one you want to attach to your code at the website.
Once that is attached, then select the Connect option on that onscreen menu.
Add multiple servers if wanted.
If it does not connect by using the Connect option found there in that server menu, then use the Home button on your remote and that will take you to the Home Launcher screen. Then use the LiveTV or VOD option and then it should connect (assuming everything else is correct)'
Last edited:
go to stream line option and enter your portal then crendital use your username and password from your m3u link and you should be able to connect. also, if you have m3u then make sure your Mac id is not attached to your code on your provider site.
follow this. you are not going to get any easier than this
http://iptvtalk.net/showthread.php?42607-BuzzTV-XR4500-XRS4500-some-setup-instruction
and just incase you dont want to read the whole thing
c/p crazed 9.6
Launcher screen > Server Settings > Sever Line > Add Server.
Enter thru the onscreen Keyboard (KB) a favorite name to name your Portal. It can be any name you want, keep it short and sweet.
After the name has been entered, either press the Back button on your RCU and scroll down to the next slot and then press enter again to bring up the KB.
Or that blueish greenish colored key on the KB brings you to the next slot as well.
The Portal URL is next to be entered and you will notice that the BuzzTV4 app already has the http:// prefix entered for you, so follow that up with your server URL.
Next we would leave the User Credentials box un-checked and scroll down to Connect, but do not press on it yet.
First thing we need to do is visit the Server website and log onto your code and enter the MAC ID onto your code.
The MAC ID you want is shown as 'Server ID' and is seen in the top right hand corner of that same onscreen Server setup menu.
There will be two MAC Addresses/IDs shown there.
Top one is shown as the MAC Address and bottom one is shown as the Server ID
The one to add to the server is the Server ID
You will notice that both of those end with the same 6 digits , while the first 6 digits are different.
The Server ID starts with 00:1a:79 and is the correct one you want to attach to your code at the website.
Once that is attached, then select the Connect option on that onscreen menu.
Add multiple servers if wanted.
sometimes (especially the first time with the 4500), when attempting to connect with MAC, it will not connect thru the server menu.
So add this to that C/P...
'If it does not connect by using the Connect option found there in that server menu, then use the Home button on your remote and that will take you to the Home Launcher screen. Then use the LiveTV or VOD option and then it should connect (assuming everything else is correct)'
make sure you Mac address is correct which starts with 00:1A:79..... and might be labeled as ID. then go to your provider site and attach that Mac address and write down your url/portal. now change country lock to all and hit reset on your provider site. now come back to your box and verify url is correct then hit connect and see what happens.