Help for Rocket IPTV Server.
hopefully this is the end of all the bozos who were stressing the server by getting it free. Good things hopefully will come from this.
Read the announcement. It is the uppermost post. Unless something changes, the donation number will be both the username and password.
Last edited:
I was just wondering that myself. Hopefully they will add a tutorial to the announcement post showing exactly where it goes.
And each individual donation number needs to be linked with their MAC addy from their receiver or device.
That can be done thru service website.
As far as other devices then the avov which Iboo has, I don;t know.
lol.. that is bad answer, I know
I do not have the mag254 connected,
I do not use Stalker , so I do not know really how that works.
Check Announcement thread.
There are many on-going threads now too that will show some answers.
Last edited:
This tutorial is based on previous experience with Username/Password Authentication on a MAG 254 / AVOV VIXO 1 / TVOnline+ units
For MAG units:
When your Username/Password Authentication is implemented I suggest rebooting your device.
If NFPS is your only Portal, your device will automatically boot into the NFPS Portal. If you have multiple portals select the NFPS portal, and it will load.
You will now see the Authentication Bar load up in the background, but you will now be prompted to enter your Username (Donation #), once you enter that hit OK.
You will now be prompted to enter your Password (Donation #), once again you will have to hit OK. In some cases it will look like you have entered your Password incorrectly with a red "X".
This is ok, all you have to do it reset your MAG device at this point, and reload the portal. The Authentication Bar will pop up on the screen and will load like normal into the NFPS portal. You should only be prompted to enter your Username/Password (Donation #) once per MAC change. If you are prompted for your Username/Password more than once it is likely you have entered the incorrect information.
A reboot is recommended after Authentication details have been entered in correctly.
--------------------------------------------------
AVOV units:
If you already have the NFPS server information in your device, go to the settings area where you enter all your Portal information to log into NFPS servers.
At this point all you will have to do is edit your current information and hit the "Credentials" field and this will give you access to enter your Username/Password (Donation #). Save your information and reboot your device. It should connect without issue at this point.
As for specific details on AVOV TVonline V2 / AVOV TVonline+ / AVOV VIXO 1 / AVOV VIXO 2 I would suggest looking in the AVOV section on the forums for further assistance. The above information is the general guide to adding Username/Password Authentication to those units.
All credit to thegame16
For MAG units:
When your Username/Password Authentication is implemented I suggest rebooting your device.
If NFPS is your only Portal, your device will automatically boot into the NFPS Portal. If you have multiple portals select the NFPS portal, and it will load.
You will now see the Authentication Bar load up in the background, but you will now be prompted to enter your Username (Donation #), once you enter that hit OK.
You will now be prompted to enter your Password (Donation #), once again you will have to hit OK. In some cases it will look like you have entered your Password incorrectly with a red "X".
This is ok, all you have to do it reset your MAG device at this point, and reload the portal. The Authentication Bar will pop up on the screen and will load like normal into the NFPS portal. You should only be prompted to enter your Username/Password (Donation #) once per MAC change. If you are prompted for your Username/Password more than once it is likely you have entered the incorrect information.
A reboot is recommended after Authentication details have been entered in correctly.
--------------------------------------------------
AVOV units:
If you already have the NFPS server information in your device, go to the settings area where you enter all your Portal information to log into NFPS servers.
At this point all you will have to do is edit your current information and hit the "Credentials" field and this will give you access to enter your Username/Password (Donation #). Save your information and reboot your device. It should connect without issue at this point.
As for specific details on AVOV TVonline V2 / AVOV TVonline+ / AVOV VIXO 1 / AVOV VIXO 2 I would suggest looking in the AVOV section on the forums for further assistance. The above information is the general guide to adding Username/Password Authentication to those units.
All credit to thegame16
Do I understand the username and password
will be the 12 digit donation number. (of course linked to the mac address of the box)
not the 18 digit number called trac order number that started with 330 in my donations or as paiao states can also start with 192
And that number is the username
and that same number will be placed on the password line also
Also use the new STB emulator soon to be released for better performance
please clarify if my understanding is correct for my NFPS avov1, avov2, tv online box units in my case.
Thank you for your support.
will be the 12 digit donation number. (of course linked to the mac address of the box)
not the 18 digit number called trac order number that started with 330 in my donations or as paiao states can also start with 192
And that number is the username
and that same number will be placed on the password line also
Also use the new STB emulator soon to be released for better performance
please clarify if my understanding is correct for my NFPS avov1, avov2, tv online box units in my case.
Thank you for your support.
about all you can do is buy a new donation this time buy it on your own no reseller