IPTV66 Tutorial: Minimal Steps to configure the STB Emulator to work with IKS66 service.

[fatlard]

Download and install STB Emulator on your Fire TV/Stick using sideload methods. You can use any method found on the internet.

1. Launch the STB Emulator application and the initial portal screen directing you to the STB Wiki. Take some time to read the Wiki. It can only help if you read this.
2. Select the Menu button (three lines) on remote control to open Menu
3. Select Settings and select the profile you want to change.
4. Select existing to modify the existing profile or create a new profile if you desire.
5. Leave the STB Model as MAG250.
6. Select Portal Settings. Enter the http://66.iptv66.tv
7. Scroll down and find MAC address. This is an important number because it is how your IPTV service will identify the set top box.
8. You must change the default MAC address, tap on MAC address. Please change the last 3 digits. You can use a generator here https://iptvnumbers.net/search/macaddress.php
9. Now go to Device ID and select Send Device ID. People experience blank screens if Send Device ID is not selected.
10. Save your profile and select Exit to exit STB emulator.
11. Start up STB emulator and it will connect to the IPTV servers. Once it connects properly it will prompt you for a username password. At this point use the Menu button (Three Lines) to select the keyboard to enter your username and password. It should only ask you once.

 

[horseman]

Download and install STB Emulator on your Fire TV/Stick using sideload methods. You can use any method found on the internet.

1. Launch the STB Emulator application and the initial portal screen directing you to the STB Wiki. Take some time to read the Wiki. It can only help if you read this.
2. Select the Menu button (three lines) on remote control to open Menu
3. Select Settings and select the profile you want to change.
4. Select existing to modify the existing profile or create a new profile if you desire.
5. Leave the STB Model as MAG250.
6. Select Portal Settings. Enter the http://66.iptv66.tv
7. Scroll down and find MAC address. This is an important number because it is how your IPTV service will identify the set top box.
8. You must change the default MAC address, tap on MAC address. Please change the last 3 digits. You can use a generator here https://iptvnumbers.net/search/macaddress.php
9. Now go to Device ID and select Send Device ID. People experience blank screens if Send Device ID is not selected.
10. Save your profile and select Exit to exit STB emulator.
11. Start up STB emulator and it will connect to the IPTV servers. Once it connects properly it will prompt you for a username password. At this point use the Menu button (Three Lines) to select the keyboard to enter your username and password. It should only ask you once.

Which mediaplayer do you recommend?
MX, XMLTV, Internal, LJK, Exo

thanks

 

[big dady]

LJK is my preference

 

[billybuds]

Thanks for this, I have followed the steps. On restarting the STB Emulator I get a blue screen with the message "Your STB is blocked. Call the provider". I have tried an IPTV reset and a hard reset of my Fire TV with no luck. Any suggestions?

 

[fjuman]

Thanks for this, I have followed the steps. On restarting the STB Emulator I get a blue screen with the message "Your STB is blocked. Call the provider". I have tried an IPTV reset and a hard reset of my Fire TV with no luck. Any suggestions?

usually indicates wrong mac address. IE mac address in app does not match mac address on server. Also check that you are using correct server. Make sure u are using 00:1A:78:XX:XX:XX mac range as you are using an emulator.

 

[fjuman]

to add to original post, I also strongly recommend using appropriate related emulator to match your service.
apk links can be found here http://iptvtalk.net/showthread.php?24620-New-release-v0-9/page2
Lots of the settings are populated eg no need to select send device ID and for iks66 no need to put in server url and mac populates with a 78 instead of 79.

 

[TDN83]

Yo hice todo lo que dicen aquí y no trabaja dice que el emulador esta bloqueado por el proveedor ayuda por favor gracias

 

[pumpkin99]

I get bar and it stays there. does not connect to server.

 

[Michael.s]

I can't watch VOD. I always see a black screen and the player never start.
Live channels are working perfectly. I need help to configure the Videoclub. Thanks

 

[Novaraza]

Tiene que ir al proveedor..Si no tiene usted la cuenta dígale a quien se la vendió que tiene que hacerle un "restart Al Portal y cuenta suya.. y lo ya se conectará!.. suerte

 

[dmaxi68]

I can't watch VOD. I always see a black screen and the player never start.
Live channels are working perfectly. I need help to configure the Videoclub. Thanks

After some googling and testing I found the solution. Just change your default player to IJK. Now VOD is working perfectly!!!!!

 

[dmaxi68]

After some googling and testing I found the solution. Just change your default player to IJK. Now VOD is working perfectly!!!!!

Again it is not working, just could watch half movie and the video frezzes, after that cannot play any other movie from VOD section. :-(

 

[dmaxi68]

Again it is not working, just could watch half movie and the video frezzes, after that cannot play any other movie from VOD section. :-(

VOD is up again, today monday, when VOD is up only can play movies when IJK player is selected, with the other options VOD didn't work.-

 

[csavoia]

I am using dol software and I put the portal URL in and gave my Mac addess when I purchased the donation.
When I received the info back I input as I always do the portal URL and then hit connect to service but it comes up service not available.
I don't use stb emu because stream link has its dream online software that we are told to use.

 

[jsanz]

Thank you... glad I found your post. VOD is now working for me. Now I need to find the same fix for Smart IPTV on my Samsung Smart TV.

 

[csavoia]

I never reviewed a username and password. I set it up today the way I was supposed to and it worked fine. Tonight I try again and it says host not found. So I reset IPTV and used different Mac address and clicked send device is. Now all I get is a blank screen.

Please please help.

 

[csavoia]

i have reset and done Mac generator and everything else I am supposed to do numberojs times. I either get a blank screen or host not found.
PLEASE XAN ANYONE HELP???
I am now literally begging here.