Stalker client: unable to load channels

#21
kaguts said:
Not sure why but I am opening the correct xml its just laid out differently than in your post. My timeout is set to 90 but the values are not what I have put xbmc. They are default. I also do not see ROAMING in my folders. Strange stuff. I have always figured things out and will eventually get this too. Like I said I have the old XBMC running the stalker without epg and it works still.

The default in xbmc is now 90 and it is still doing the same thing. Im sure Im missing something simple but this is getting to me now.

OK!! I found where I was supposed to make the edit and its done now. Still getting same error though. When the pvr loads up on the top right corner the bar never moves like my other version?
Click to expand...
ANother edit: Sorry it took so long. I hate working.....believe me.

Have you updated Kodi to version 15?

How long are you waiting for it load?

Sometimes you have to wait 20-30 seconds & the times do vary. Also,try to close Kodi again & then opening it back. That's part of the new 15 build, which does sometimes NOT save the input that you put into the Kodi settings themselves without editing the xml yourself. Remember, Kodi 15 is in a "still in progress" mode, per-say. But it does work better with this server.

If your still having problems. Try clearing the cache under the "System"/ "TV" / "General"/ "Clear data" : Mind you that this will reset the setting that you just put into your xml file. So you will have to repeat the steps above.
 
Last edited:
#22
Its working now. Im actually reluctant to say it but I had networking issues that was causing the problem. Someone decided to unplug a switch and not say anything! Thanks for all your help and I did use your settings xml with a small mac adjustment.
 
#23
I'm having the same issue on my PC and my Android box. I had 14.2 Kodi installed, changed to 15 and followed the instructions provided on this site (there are lots of youtube videos as well)... pretty simple setup, but I keep getting 'unable to load channels'. I adjusted the connection timeout in settings.xml and I get the same error. I have donated and have my MAC linked... but I have not been able to get it to work. I feel like I'm losing my mind lol.

My steps:

- Fresh install of Kodi 15
- System > Settings > Add-ons > My Add-ons > PVR clients > Stalker Client
- Configure Portal 1 with my MAC Address on my Android box that's also linked to my donation
- Server Address is "1.iptvprivateserver.tv"
- Guide is "Prefer XMLTV"
- XMLTV remote URL is "http://is.gd/NFPSE"
- Ok and back out to System > Settings > TV > General > Enable
- Get "Stalker Client: Unable to load channels"

- Tried System > Settings > TV > General > Clear data
- Get "Stalker Client: Unable to load channels"

- Restart Kodi
- Get "Stalker Client: Unable to load channels"

- Closed Kodi, modified settings.xml and changed the connection timeout to "60"
- Restart Kodi
- Get "Stalker Client: Unable to load channels"
 
Last edited:
#24
One thing that can correct issues is to make sure you "Clear data" in the Live TV settings. Also, Disable/Enable sometimes works. But most of all, check all settings, including the first page to make sure you do have the right active portal, and that you have no trailing blanks. Also, no one has confirmed that the "00:1A:78" prefix works yet, so use "00:1A:79" instead until told otherwise. Don't mess with the time zone, it isn't working anyway. Be careful with the settings.xml, as if you screw up a tag, the settings could become invalid, and after setting the timeout, don't click "ok" if you are confirming your changes on the Settings pages, just exit out. 0 is what you will see for Connection Timeout, no matter what you set the timeout to be .
 
Last edited:
#25
dara said:
One thing that can correct issues is to make sure you "Clear data" in the Live TV settings. Also, Disable/Enable sometimes works. But most of all, check all settings, including the first page to make sure you do have the right active portal, and that you have no trailing blanks. Also, no one has confirmed that the "00:1A:78" prefix works yet, so use "00:1A:79" instead until told otherwise. Don't mess with the time zone, it isn't working anyway. Be careful with the settings.xml, as if you screw up a tag, the settings could become invalid, and after setting the timeout, don't click "ok" if you are confirming your changes on the Settings pages, just exit out. 0 is what you will see for Connection Timeout, no matter what you set the timeout to be .
Click to expand...

Thanks for the reply...

- I don't have a "Live TV" settings, I do have TV settings under System > Settings > TV. When I select 'Clear data' it does so, and then gives me "Stalker Client: Unable to load channels".
- "Active Portal" is 1, with the Server Address set to "1.iptvprivateserver.tv" with no trailing spaces
- I was using my devices own MAC address that I registered at papiao.is using my donation. I changed the MAC back to '00:1A:79:00:00:00' but I still get "Stalker Client: Unable to load channels"
- I only changed the '10' to '60' in the connection time out settings, nothing else. Didn't make any difference, still get "Stalker Client: Unable to load channels"
 
Last edited:
#26
here is what i have learn every time time i change anything in pvr stalker at time even when you clear data it resets the xml to 0. so ones you make your changes close kodi make the mod to the xml file by the way 75 is the magic number open ok and your back in business
 
#27
1iwilly said:
here is what i have learn every time time i change anything in pvr stalker at time even when you clear data it resets the xml to 0. so ones you make your changes close kodi make the mod to the xml file by the way 75 is the magic number open ok and your back in business
Click to expand...

I looked over the settings in the Stalker Client, General tab has Active Portal set to 1, Connection Timeout is set to 5. Portal 1 tab has MAC Address set to mine, Server Address has 1.iptvprivateserver.tv, Guide Preference is set to 'Prefer XMLTV' and XMLTV Remote URL is set to 'http://is.gd/NFPSE'. Nothing else was modified.

I went to System > Settings > TV > Clear data, then shut down Kodi. I modified Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker/settings.xml so that 'connection_timeout' value is set to "75". Save, exit.

I restart Kodi, I see top right 'PVR Manager is starting up', it's up there for about 1 second and then I get "Stalker Client: Unable to load channels".

One thing to clarify... this is a fresh virgin install of Kodi 15 and all I did was configure the built in Stalker Client and enabled TV under System > Settings > TV. Nothing else was installed... that's ok right?
 
#28
Rekkid said:
Thanks for the reply...
- "Active Portal" is 1, with the Server Address set to "1.iptvprivateserver.tv" with no trailing spaces
Click to expand...

Try this... include the protocol type in the url: "http://1.iptvprivateserver.tv" . It shouldn't matter, but might as well try. Also, don't use the 00:00:00 ever, change it to something else random in hexdigits, not just all zeros. I doubt it would be a DNS issue, but try pinging the url as well to see if you get a return.
 
#29
dara said:
Try this... include the protocol type in the url: "http://1.iptvprivateserver.tv" . It shouldn't matter, but might as well try. Also, don't use the 00:00:00 ever, change it to something else random in hexdigits, not just all zeros. I doubt it would be a DNS issue, but try pinging the url as well to see if you get a return.
Click to expand...

Prefixing the server address with "http://" didn't make a difference. I've been using my own MAC address (of the device I'm using) associated to my donation... I'm not using '00:1A:79'... I only tried that a couple of times. I went back and put in 00:1A:79:16:E7:BD just for fun, same problem "Stalker Client: Unable to load channels".

I was able to successfully ping 1.iptvprivateserver.tv, 75 ms return.
 
#30
I think I understand this now. I modified settings.xml and put "150" as the connection_timeout and guess what? It worked. I have a 200 MBPS connection too, pretty quick, guess it doesn't matter.

... so It's working now :) Thanks guys!
 
#33
one thing that worked for me and other people as well..it sucks .....uninstall completely and then do a reinstall of rc2..then jump thru all hoops of editing .xml file as stated in previous posts... did it on my computer..not wiping my android box..ill wait and see if a fix comes or not
 
#34
Thru trial and error I have my connection timeout at 600. Yes 600. 95s 100s 200s didn't do it. Location Thailand. Speed 11m down 1 up. Win 7 pc. StalkerPVR ver 8. Very little if any buffering but am 12 hours out of sync with the main traffic.
 
#35
fireman said:
Thru trial and error I have my connection timeout at 600. Yes 600. 95s 100s 200s didn't do it. Location Thailand. Speed 11m down 1 up. Win 7 pc. StalkerPVR ver 8. Very little if any buffering but am 12 hours out of sync with the main traffic.
Click to expand...

Try this, as it could be a DNS issue. Ping the server that you are using to connect, and see how long it takes for a return, and then use that IP address instead. If it takes long to resolve, but the ping is relatively short, then it could just be your local DNS. You could also do a tracert to see how many hops it takes to get to the server as well, as you are on the opposite side of the world.
 
#36
Dara. A ping yeilded 255 ms. A tracert failed at hop 8, multiple times. Tried changing to Google dns same timing. No biggie because it works. Just the further away you get the number may be higher than 60. You can't get much further away than Thailand.
 
You must log in or register to reply here.
Top Bottom
Back
Menu