Setup help kcmood

[kcmood]

I did all that and saw all that you mentioned it loaded and it is still asking me to select a portal to load. It still is no tv no movies no nada

 

[kcmood]

after you download r10 -- need to go to bios and set you tv settings - ill help with that

Okay I am ready

 

[kcmood]

Okay I am ready

Let me add I have the reset instructions by afti that I printed out and the setup instruction s I think by bio. I am calling it a night and am going o relax in front of the boob tube for an hour or so. I'll check back in the morning. Thanks

 

[wineonnine]

if you got r10 down load you need to set bio's (tv setting)next then do set up

 

[kcmood]

if you got r10 down load you need to set bio's (tv setting)next then do set up

I did all that again. I have the r10 showing and I did the set up. Still no tv. I discovered something tho-when it comes up with menu after rebooting the mag is off thats why I am not getting anything I guess. when I turn it on it says no connection. I am assuming bright blue lite is on and dim blue light is off. Correct me if I am wrong. I have asked this question before, hope I didn't misunderstand. On setup when I click on General, do I put timeserver.pool.ntp.org or do I leave the timeserver word off? I left it off. Also on the inner portal my temperature is in F but on the menu page it is in C. Why is that?

 

[K00lKatT]

bright blue is off, dim blue is on..
nothing you can do about the temp in outer portal
timeserver stays off, you are correct...

 

[kcmood]

I did all that again. I have the r10 showing and I did the set up. Still no tv. I discovered something tho-when it comes up with menu after rebooting the mag is off thats why I am not getting anything I guess. when I turn it on it says no connection. I am assuming bright blue lite is on and dim blue light is off. Correct me if I am wrong. I have asked this question before, hope I didn't misunderstand. On setup when I click on General, do I put timeserver.pool.ntp.org or do I leave the timeserver word off? I left it off. Also on the inner portal my temperature is in F but on the menu page it is in C. Why is that?

What about the timesaver question. And I still have no tv

 

[K00lKatT]

see my post above yours..

 

[kcmood]

Thanks. Sorry about that. Anything I can do about getting the box working?

 

[K00lKatT]

are you wired or wireless??...tell me exactly what you have entered in both lines of portal 1 and also portal 2....do you have network set at DHCP (auto)???

 

[kcmood]

are you wired or wireless??...tell me exactly what you have entered in both lines of portal 1 and also portal 2....do you have network set at DHCP (auto)???

I am hard wired---portal 1--rocket--portal 1 url 1.iptvprivateserver.tv--Network set at DHCP(auto)

 

[K00lKatT]

when you were in your BIOS menu (blue screen) did you change your network to DHCP or leave it on NAND??

 

[kcmood]

left it on nand I believe. when it reboots it says loading nand

 

[K00lKatT]

does your box show you connected to internet?? did you check the network settings and see your ip and other info??

 

[kcmood]

Where does it show you are connected internet? It says no ip on the screen where the auto DHCP is

 

[K00lKatT]

in main screen, scroll rt to settings, click ok, scroll down to network info, click ok, then with auto DHCP hi-lited click on it..

 

[kcmood]

okay now what

 

[K00lKatT]

tell me what it shows you..does it show all the info, your gateway, subnet, etc....

 

[kcmood]

:Wired ethernet--current configuration DHCP
link status UP
mac address 00:1a:79:
IP 192.168.1.21
netw mask 255.255.255.0
gateway 192.168.1.254
dns server 192.168.1.254

 

[K00lKatT]

first thing I want you to do is edit your post to remove your mac addy.
Then I want you to turn off your box, unplug the power jack and remove the RJ-45 Ethernet cable, then unplug your modem and router if you have a router..
then boot up the modem, wait for it to fully come up and then boot the router, wait, then plug in Ethernet cable to box and turn on..