NFPS / Private Need help for using kodi
- Thread starter Ayan
- Start date
IPTV Private Server (NFPS)
I would recommend to use the PVR Stalker if you want a TV Guide. See below.
Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Add-ons, PVR and select the Stalker Client.
4. Disable the PVR Stalker Client and then select configure.
5. Select Configure/General Tab
6. Set active portal to 1 and set time out 15. If using 8.0.3 see note below.
7. Select Portal 1
8. Enter the MAC address that you generated and linked in steps 1 & 2
9. Enter the Server Address. 11.iptvprivateserver.tv
10. Set the Time Zone you’re in. You can use this site to get the correct Time Zone Name, use the TZ column: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
11. Set Guide Preference to Prefer XMLTV
12. Set XMLTV Scope to Remote URL.
13. Set XMLTV Remote URL to:
NFPS and Rocket: https://papiao.is/main/EPG/mac/00:1A:78:XX:XX:XX/donation/XXXXXXXXXXXXX/fname/NFPSF1
IKS66: https://iks66.tv/main/EPG/mac/00:1A:79:XX:XX:XX/donation/XXXXXXXXXXXXX/fname/NFPSF1
Note: you have to remove the XX's and replace with your actual MAC and Donatation number . Also ensure you enter the "fname" of the file you want.
here are accepted values for fname
NFPSF1= English,
NFPSF2 =Engl with non-DST fix (if your guide shows to be off by an hour, clear database and restart kodi after setting to this)
NFPSF3 =Full
NFPSF4 =full with non-DST fix (if your guide shows to be off by an hour, clear database and restart kodi after setting to this)
14. Token, leave blank.
15. Serial Number: Random Alphanumeric. Min 4 characters
16. Device ID 1: Random Alphanumeric. Min 4 characters
17. Device ID 2: Random Alphanumeric. Min 4 characters
18. Signature: Random Alphanumeric. Min 4 characters
19. Click OK to change it.
20. Enable the Stalker PVR Client.
21. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.
This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.
Note: If using 8.0.3 PVR Client then go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\addon_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml and
insure the connection_timeout value is at 60 and then save the changes.
Note: If you elect to also use the Stalker Video Client you will need to enter the same information for the SR#, Device ID 1 & 2, and Signature fields that you used in steps 16-18.
Then you can use this tool to clean up the TV Guide and git read of what you don't want: http://iptvtalk.net/showthread.php?8634-Kodi-PVR-Channel-Template-Loader
Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Add-ons, PVR and select the Stalker Client.
4. Disable the PVR Stalker Client and then select configure.
5. Select Configure/General Tab
6. Set active portal to 1 and set time out 15. If using 8.0.3 see note below.
7. Select Portal 1
8. Enter the MAC address that you generated and linked in steps 1 & 2
9. Enter the Server Address. 11.iptvprivateserver.tv
10. Set the Time Zone you’re in. You can use this site to get the correct Time Zone Name, use the TZ column: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
11. Set Guide Preference to Prefer XMLTV
12. Set XMLTV Scope to Remote URL.
13. Set XMLTV Remote URL to:
NFPS and Rocket: https://papiao.is/main/EPG/mac/00:1A:78:XX:XX:XX/donation/XXXXXXXXXXXXX/fname/NFPSF1
IKS66: https://iks66.tv/main/EPG/mac/00:1A:79:XX:XX:XX/donation/XXXXXXXXXXXXX/fname/NFPSF1
Note: you have to remove the XX's and replace with your actual MAC and Donatation number . Also ensure you enter the "fname" of the file you want.
here are accepted values for fname
NFPSF1= English,
NFPSF2 =Engl with non-DST fix (if your guide shows to be off by an hour, clear database and restart kodi after setting to this)
NFPSF3 =Full
NFPSF4 =full with non-DST fix (if your guide shows to be off by an hour, clear database and restart kodi after setting to this)
14. Token, leave blank.
15. Serial Number: Random Alphanumeric. Min 4 characters
16. Device ID 1: Random Alphanumeric. Min 4 characters
17. Device ID 2: Random Alphanumeric. Min 4 characters
18. Signature: Random Alphanumeric. Min 4 characters
19. Click OK to change it.
20. Enable the Stalker PVR Client.
21. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.
This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.
Note: If using 8.0.3 PVR Client then go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\addon_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml and
insure the connection_timeout value is at 60 and then save the changes.
Note: If you elect to also use the Stalker Video Client you will need to enter the same information for the SR#, Device ID 1 & 2, and Signature fields that you used in steps 16-18.
Then you can use this tool to clean up the TV Guide and git read of what you don't want: http://iptvtalk.net/showthread.php?8634-Kodi-PVR-Channel-Template-Loader