Mag 254 Bios Factory Reset how to get there
Mag 254 Bios
1 unplug Mag254
2 push and hold the button with 3 dots and 3 lines and plug power back in you should have a blue screen with settings (make sure plug and hold on remote at the same time).
3 Do factory reset
4 Change TV settings to auto later on if everything works you can change that in the inner portal
5 Check and change your setting save and reboot
6 If the box doesn't boot up
7 Once again do factory reset and make sure it's set to nand or nand 2
8 Save settings & reboot
Things you may need to change
1 Video settings should be set to your TV settings
2 You should be booting from nand or nand 2 which ever that works for you.
3 Factory Reset. ( Screen shows def. setting )
Good luck
Mag 254 Bios
1 unplug Mag254
2 push and hold the button with 3 dots and 3 lines and plug power back in you should have a blue screen with settings (make sure plug and hold on remote at the same time).
3 Do factory reset
4 Change TV settings to auto later on if everything works you can change that in the inner portal
5 Check and change your setting save and reboot
6 If the box doesn't boot up
7 Once again do factory reset and make sure it's set to nand or nand 2
8 Save settings & reboot
Things you may need to change
1 Video settings should be set to your TV settings
2 You should be booting from nand or nand 2 which ever that works for you.
3 Factory Reset. ( Screen shows def. setting )
Good luck