IPTV66 Is stalker working ??

IPTV66 Help here!
#23
Here is my set up hope this helps. I had it working for a day with mac at all zeros but had to switch back to original mac today

Using firetv stick newest generation
Kodi 17.0 with fusion/tvaddons
Pvr stalker client built in
Used setup sticky PVR Stalker (Kodi Built-in) Set up tutorial
Received donation number from iks66.com.
Config as follows
General
Active port 1
Connection time out 120
Portal 1 settings
Mac address 00:1A:78:XX:XX:XX (did work briefly with all zeros)as received from iks66
Server address was http://mw1.iptv66.tv/stalker_portal/c/index.html now http://s1.iptv66.tv/c/
time zone America /Eastern should effect anything??
Login 13 digit route number from iptv66
Password 13 digit route number from iptv66
Guide
Preference Prefer XMLTV
Cache guide data on
Cache time 24
Scope Remote URL
Remote URL http://yahyabell.com
Token Blank
Serial number XXXXXXXXXXXXA 12digits and 1 cap letter can be anything
Device id xxxxxxxxxxxxxxxxx 16 digits can be anything

Device id2 blank or optional I used 16 digit randum number
Signature blank or optional I used a 8 digit randum number
 
#24
worldwide said:
I have a subscription to IPTV 66 that I have not been able to access ever since the stalker apps went down.
I installed Kodi 17 after installing Nemmysys that did not seem to work and corrupted my box.
What must I do to get my live channels back through IPTV 66 with the latest Kodi, is this possible?, and if not what other services could I use to install channels through a PVR like the one I had for a month was usa iptv, yet the channels went down a lot, so I preferred the one that used Stalker because it seemed easier to work with.
I have had 66 since Sept 16 except for one month when their payment buttons did not work to renew, so they still owe me some time until April 8th on the script.
Perhaps the owners of the servers should refund the clients because I have been reading that the servers were overloading Stalker which caused them to go down.
Can anyone give me a link to a tutorial to restore live channels preferably with 66 where I have the script, or with a pvr client which is better than usa IPTV?
Click to expand...

What's working for me is to use the M3U link from 66. You get the link from the same place you reset and change mac. I've only tried the generic with options one but it works. It does seem timeout and I need to disable and enable the app but, for now, that's easy to do. You put the link into IPTV Simple Client, a built in add-on, and that's it. Channels are back. Haven't figured out the Guide yet...

If you figure more out, please share.
 
#25
junk2me said:
Here is my set up hope this helps. I had it working for a day with mac at all zeros but had to switch back to original mac today

Using firetv stick newest generation
Kodi 17.0 with fusion/tvaddons
Pvr stalker client built in
Used setup sticky PVR Stalker (Kodi Built-in) Set up tutorial
Received donation number from iks66.com.
Config as follows
General
Active port 1
Connection time out 120
Portal 1 settings
Mac address 00:1A:78:XX:XX:XX (did work briefly with all zeros)as received from iks66
Server address was http://mw1.iptv66.tv/stalker_portal/c/index.html now http://s1.iptv66.tv/c/
time zone America /Eastern should effect anything??
Login 13 digit route number from iptv66
Password 13 digit route number from iptv66
Guide
Preference Prefer XMLTV
Cache guide data on
Cache time 24
Scope Remote URL
Remote URL http://yahyabell.com
Token Blank
Serial number XXXXXXXXXXXXA 12digits and 1 cap letter can be anything
Device id xxxxxxxxxxxxxxxxx 16 digits can be anything

Device id2 blank or optional I used 16 digit randum number
Signature blank or optional I used a 8 digit randum number
Click to expand...

THANK YOU!!!

Will try this tonight.
 
#26
I have pretty much the same setup as junk2me running on Kodi 16.1 - I didn't know about the changes until my subscription stopped working and came here to find out about the new server address - I simply updated that in Stalker Client and I was up and running again (I had to change my hardware acceleration settings as well since the video was choppy and out of sync but other than that, the only thing I've noticed different is the adult channels are no longer there).

I didn't read about Stalker no longer being supported until afterwards - will this setup keep working for me or are my days numbered? We really like the guide we currently have and it sounds like we would lose that with one of the currently supported options. I'd love to see screenshots of what the interface looks like for the STB emulators and XTreams code options to see exactly what they look like.
 
#27
Im on the PVR Stalker Client in Kodi 16.1 on a Minix box. Im still have my MAC from months ago.
My channels wouldn't load after I upgraded my Kodi from 15.2. All I did was change the server
address to the new one, and disable the 3 acceleration settings under system/video/acceleration
and it is all working.

The EPG from yahyabell acts up sometimes…it may load or not depending on your luck. And some channels
go off then come back on. That's about it.
 
#28
Here is my set up hope this helps. I had it working for a day with mac at all zeros but had to switch back to original mac today

Using firetv stick newest generation
Kodi 17.0 with fusion/tvaddons
Pvr stalker client built in
Used setup sticky PVR Stalker (Kodi Built-in) Set up tutorial
Received donation number from iks66.com.
Config as follows
General
Active port 1
Connection time out 120
Portal 1 settings
Mac address 00:1A:78:XX:XX:XX (did work briefly with all zeros)as received from iks66
Server address was http://mw1.iptv66.tv/stalker_portal/c/index.html now http://s1.iptv66.tv/c/
time zone America /Eastern should effect anything??
Login 13 digit route number from iptv66
Password 13 digit route number from iptv66
Guide
Preference Prefer XMLTV
Cache guide data on
Cache time 24
Scope Remote URL
Remote URL http://yahyabell.com
Token Blank
Serial number XXXXXXXXXXXXA 12digits and 1 cap letter can be anything
Device id xxxxxxxxxxxxxxxxx 16 digits can be anything

Device id2 blank or optional I used 16 digit randum number
Signature blank or optional I used a 8 digit randum number
Click to expand...
Thanks junk2me... after weeks trying to make the pvr stalker work, following your set-up, make it work flawlessly!
 
#32
Most Stalker (iptvRocket) channels not starting / working ...

Hi Again Friends:

Sorry if this has been answered elsewhere. I looked at the first and last several pages (on this thread and others).

I was wondering if anyone also has the issue of most Stalker (iptvRocket.tv) channels not working? When I select
one to watch, the "Working" circle appears momentarily, then disappears; but nothing starts. Only a few channels
appear to be working.

The URL I use (which is the one I've been successfully using for a long while now) is:
Code: 
http://p1.iptvrocket.tv/c/    <--- I currently use this variant; but the following two also work to connect to the service.
http://p1.iptvrocket.tv/c/index.html
http://p1.iptvrocket.tv

This is on:
Code: 
-- Kodi v17.3
-- Stalker PVR Client v2.8.6

It's been a few months since I used the service (no time for TV), so maybe something has changed that I'm unaware of?

Any ideas?
Thank you! :)
 
#33
devnull1970 said:
I was wondering if anyone also has the issue of most Stalker (iptvRocket.tv) channels not working? When I select
one to watch, the "Working" circle appears momentarily, then disappears; but nothing starts. Only a few channels
appear to be working.
It's been a few months since I used the service (no time for TV), so maybe something has changed that I'm unaware of?
Any ideas?
Click to expand...
Are you using a VPN? If so, they are now blocking VPN connections. When my VPN is connected my stalker acts exactly as you described.
 
#34
Is anyone having any problems with Xtream-Codes IPTV addon? When I start Kodi, I get an error message: "Xtream-Codes Error" check log for more information. When I try to open the actual addon, I get the same error. I checked AND reset my route and still NOTHING. Anyone having same issue or is any able to figure out what could be causing this? Thank you everyone and "HAPPY 4th OF JULY"!!!!!!!!!!
 
#35
kjerome said:
Is anyone having any problems with Xtream-Codes IPTV addon? When I start Kodi, I get an error message: "Xtream-Codes Error" check log for more information. When I try to open the actual addon, I get the same error. I checked AND reset my route and still NOTHING. Anyone having same issue or is any able to figure out what could be causing this? Thank you everyone and "HAPPY 4th OF JULY"!!!!!!!!!!
Click to expand...

Check your PM. xtream-codes and the service works fine.
 
You must log in or register to reply here.
Top Bottom
Back
Menu