IPTV PVR stalker client suddenly stopped working and getting authentication failed
- Thread starter jillianl
- Start date
Both of you guys are using RPi's? I'm asking because I'm trying to get a route going on a AFTV but no go, my Pi's and another AFTV are working just fine.
Thanks karel, your steps got me going on my PC booting to the Linux OS after days of frustration. I replaced my MAC, serial, devices etc with new data and bingo.
The same steps and configuration on Windows 10 still gives me the dreaded "Authentication Failure", so there may be something about the Windoze OS that is killing Stalker. Just another reason to hate that company.
The same steps and configuration on Windows 10 still gives me the dreaded "Authentication Failure", so there may be something about the Windoze OS that is killing Stalker. Just another reason to hate that company.
I wonder if those steps will work on AFTV, time to check it out. Did you replace the MAC with all 00 or you just left it blank?
For Stalker Client to work you need to set a real MAC.
While you need to set the MAC to blank if you're looking to stream to VLC or Simple Client, once you have downloaded the .m3u list you must go back to a real MAC that matches your Stalker config. The .m3u method will still work.
While you need to set the MAC to blank if you're looking to stream to VLC or Simple Client, once you have downloaded the .m3u list you must go back to a real MAC that matches your Stalker config. The .m3u method will still work.
I did change the MAC to 00:00:00:00:00:00 then I did a reset and it works with built in Stalker Client on SPMC 16.6
Worked once that's about it... Again I'm getting that dreaded "Authentication Failed, Retrying"
Indeed I also put a mac-adres 00:00:00:00:00:00. I forget to mention this, because I also get the authentication error after I did this. It is turns out to be a part of the solution, together with the other staps mentioned before and summarized in http://iptvtalk.net/showthread.php?...-of-March-14-on-3-systems&p=182303#post182303
I moved the main material to the Kodi Tutorial area so the discussion would stay in one thread. IPTV Stalker (video add-on) has nothing to do with the PVR client, so that's why that thread was removed. Thanks for the contribution.
So I gave up on Stalker and focused on the simple client. I used the URL generated by the IPTV reset tool and it works way better than with Stalker. I get channels that didn't work before and I don't get booted out (at least so far).
I just downloaded my M3U and will use that instead of the URL, it's supposed to work better.
If everything continues to work, I'll post a tutorial tomorrow.
By the way, this is only 3 steps and NO AUTHORIZATION required!
I just downloaded my M3U and will use that instead of the URL, it's supposed to work better.
If everything continues to work, I'll post a tutorial tomorrow.
By the way, this is only 3 steps and NO AUTHORIZATION required!
Modmike, are you getting a full guide with logos just by using the M3U and Simple Client. I'm still using the built in Stalker Client and working pretty well. Don't mind switching over to the Simple IPTV. Do I need to zero out my Mac, and just grab the M3U and paste it into Simple Client? Thanks
ADP0361,
Sorry I should have answered your question directly. Yes you will have to zero out your Mac address and yes you can download the m3u, copy on your network, and set the path. You can also just set up Simple IPTV to go to the m3u URL directly. This will keep you up to date with any changes.
I don't get ANY kind of guide, it is frustrating and it's what I am working on next. I tried Ivue2 and while it's nice, it is very heavy. I'd prefer the native one.
By the way, when I was using Stalker, I wouldn't get some channels that I get in Simple IPTV. Do you mind sharing your Stalker settings? I need to figure out the guide issue.
Sorry I should have answered your question directly. Yes you will have to zero out your Mac address and yes you can download the m3u, copy on your network, and set the path. You can also just set up Simple IPTV to go to the m3u URL directly. This will keep you up to date with any changes.
I don't get ANY kind of guide, it is frustrating and it's what I am working on next. I tried Ivue2 and while it's nice, it is very heavy. I'd prefer the native one.
By the way, when I was using Stalker, I wouldn't get some channels that I get in Simple IPTV. Do you mind sharing your Stalker settings? I need to figure out the guide issue.
Hi, Something is definitely wrong with iptv66 I have tried activating four addresses over the past three days with stbemu app and all are logging into the portal with epg but yet only black screen channel 27 is working and some other spanish channels.
Please rectify issue.
Please rectify issue.