Rocket i need help configuring Stalker Client again

[ftawizzards]

Correct i have not installed that mac on any other device. This is the mxq and i have had the same dll error on all 4 mxq pro boxes i have. I have only tried to install the stb emulator on 1 of the boxes but expect it to act the same. I had a mxq non-pro that loaded everything perfect.

okay , recv'd that same streamer model and went ahead and installed the stb emu - double checked all settings, mac addy /made sure to check the box for "send device ID"/ backed out and exited out to log in page...but first, went here https://papiao.is/main/search_rocket ...to change the mac addy for this device..it was succesful, and so now i enter in my user/pass info and gave me the "auth error" ...so, go back to papiao and double check mac is updated to the one i chnaged to and now all was left to do is click on "iptv reset" and once it was successful..i go to my app and exit out and reload and had to re-enter my log in info and it connected...

check it out (if you haven't already) and these steps worked for me on the same MXQ streamer, so, did you get er goin'?

 

[tuxen]

issue with dll error on android is caused by the newer version of android called 'lollipop'..

you can still just use the built in stalker client, you only need to enter a few more things than the nfps version.
and it is not like its difficult, just takes a little more time.

the only thing I see wrong is the 00:1A:79 prefix which should be 00:1A:78

serial 13 digits
device id's and signature you can keep at 4 or 5, I use 4
and ofcause the login the is the donation

if you used the same mac on a previous install or box there might already be attached serial info to the mac (there definatly is now that you used the emulator), try change to a new mac before you setup the client. or maybe the new iptvreset clears that info, I kinda suspect so. it could be doing something completely different though.

if you got the emulator to work, just forget it if that is enough for you it is easier to use than kodi is you do not know him.

also if your box is rooted you can try and take on the 'dll error': http://iptvtalk.net/showthread.php?11719-How-to-solve-Stalker-NFPS-Can-t-load-DLL-(on-ROOTED-DEVICE)

 

[ftawizzards]

issue with dll error on android is caused by the newer version of android called 'lollipop'..

you can still just use the built in stalker client, you only need to enter a few more things than the nfps version.
and it is not like its difficult, just takes a little more time.

gotcha..was just reporting back on his emulator app issue earlier on, cheers

edit; but yeah for sure the stalker client nfps has many quirks and causing errors right now...i was going to tackle that next on kodi v15.2..but for sure sounds like the original stalker is prob the way to go for now..theyll prb get it sorted soon enough one would think...

 

[tuxen]

heh.
I never had any issues with dvbken's simplified client given its the correct android version (or OS), problem is most if not all new boxes come with a never os therefore more and more people with android boxes get the dreaded 'dll not found' error :/. i'm sure he will fix it along the way though and its 'only' happening on never android boxes, the windows, osx, raspberry pi versions does not have this issue to my knowledge.

 

[easytv4free]

okay , recv'd that same streamer model and went ahead and installed the stb emu - double checked all settings, mac addy /made sure to check the box for "send device ID"/ backed out and exited out to log in page...but first, went here https://papiao.is/main/search_rocket ...to change the mac addy for this device..it was succesful, and so now i enter in my user/pass info and gave me the "auth error" ...so, go back to papiao and double check mac is updated to the one i chnaged to and now all was left to do is click on "iptv reset" and once it was successful..i go to my app and exit out and reload and had to re-enter my log in info and it connected...

check it out (if you haven't already) and these steps worked for me on the same MXQ streamer, so, did you get er goin'?

Even with going to advanced and checking to use the old emu method and then restarting, i still can not find the "send device id". Can you send me a link to the one you installed so I can install the same file/

 

[easytv4free]

issue with dll error on android is caused by the newer version of android called 'lollipop'..

you can still just use the built in stalker client, you only need to enter a few more things than the nfps version.
and it is not like its difficult, just takes a little more time.

the only thing I see wrong is the 00:1A:79 prefix which should be 00:1A:78

serial 13 digits
device id's and signature you can keep at 4 or 5, I use 4
and ofcause the login the is the donation

if you used the same mac on a previous install or box there might already be attached serial info to the mac (there definatly is now that you used the emulator), try change to a new mac before you setup the client. or maybe the new iptvreset clears that info, I kinda suspect so. it could be doing something completely different though.

if you got the emulator to work, just forget it if that is enough for you it is easier to use than kodi is you do not know him.

also if your box is rooted you can try and take on the 'dll error': http://iptvtalk.net/showthread.php?11719-How-to-solve-Stalker-NFPS-Can-t-load-DLL-(on-ROOTED-DEVICE)

Thanks for your help. I do have "lollipop" and I will try the original stalker client again but that wasnt working so I tried the stalker client nfps and then the emulator.

 

[ftawizzards]

Even with going to advanced and checking to use the old emu method and then restarting, i still can not find the "send device id". Can you send me a link to the one you installed so I can install the same file/

its not a file..its the s/w version of the app..some have the device id some don't so the checking the old emu box was my back up on other android emu iptv

this time i was able to see the device id option

check the portal in settings and see if the address is correct ... 11.iptvrocket.tv for now and let us know what error you are getting after entering your user/pass (donation)

 

[easytv4free]

its not a file..its the s/w version of the app..some have the device id some don't so the checking the old emu box was my back up on other android emu iptv

this time i was able to see the device id option

check the portal in settings and see if the address is correct ... 11.iptvrocket.tv for now and let us know what error you are getting after entering your user/pass (donation)

There are different version of the emulator. That is why i was asking what link you installed it from so i could make sure I have the same version. I downloaded mine form a link on this forum. The portal is not editable as it is grayed out and says 11.iptvrocket.tv. I do not get any erorrs when trying to login. It just sits there and acts as if I never submitted the information

 

[ftawizzards]

There are different version of the emulator. That is why i was asking what link you installed it from so i could make sure I have the same version. I downloaded mine form a link on this forum. The portal is not editable as it is grayed out and says 11.iptvrocket.tv. I do not get any erorrs when trying to login. It just sits there and acts as if I never submitted the information

same file as yours most likely? or you can install the app fromgoogle store as i idd and this one loaded as the one with the device id version...so who knows and as i pointed out in my recent post on "my" steps..

edit;well, thats how it connected at this end...

 

[easytv4free]

issue with dll error on android is caused by the newer version of android called 'lollipop'..

you can still just use the built in stalker client, you only need to enter a few more things than the nfps version.
and it is not like its difficult, just takes a little more time.

the only thing I see wrong is the 00:1A:79 prefix which should be 00:1A:78

serial 13 digits
device id's and signature you can keep at 4 or 5, I use 4
and ofcause the login the is the donation

if you used the same mac on a previous install or box there might already be attached serial info to the mac (there definatly is now that you used the emulator), try change to a new mac before you setup the client. or maybe the new iptvreset clears that info, I kinda suspect so. it could be doing something completely different though.

if you got the emulator to work, just forget it if that is enough for you it is easier to use than kodi is you do not know him.

also if your box is rooted you can try and take on the 'dll error': http://iptvtalk.net/showthread.php?11719-How-to-solve-Stalker-NFPS-Can-t-load-DLL-(on-ROOTED-DEVICE)

What remote URL do you put in?

 

[tuxen]

the middle one I guess since we are in the rocket section, its best to use the full url, in clients above 0.8.4 its needed coz they do not redirect.

Name: NFPS
Url: portal.iptvprivateserver.tv/stalker_portal/c/
or
Name: Rocket
Url: portal.iptvrocket.tv/stalker_portal/c/
or
Name: IPTV66
Url: mw1.iptv66.tv/stalker_portal/c/

EDIT: I just tried 11.iptvrocket.tv, and that url does not redirect anymore, so that might be your problem!
tested portal.iptvrocket.tv/stalker_portal/c/ and that works.

btw. you probably know this by now:
use a new mac address that does not have previus serial/device id attached. ie one that you have not used.
again I have no idea if the new iptvreset button wipes this info, it would be neat. you can always try but the sure way is to change to a 'fresh' mac addres.

then setup the client.

good luck