well i thought i had it all figured out, i was using the stalker nfps client with my iks66 sub and it was working good, i had the tv icon on the front page of kodi , down by weather and programs. i would click tv and go tto the channel and life was good. now today i come in and turn kodi on and get stalker client nfps authorization failed message and the tv icon is gone. i have went back to settings and enabled and disabled but nothing works at all. any body got any help for me i would really love it.
dont know what happened or how to fix it
- Thread starter heelhead
- Start date
It would be awesome to have something like a Announcement saying how things have changed http://iptvtalk.net/showthread.php?9444-Serial-Numbers-Now-Required-for-Kodi-Addons
so just add Serial, Device Id, Device Id 2 and Signature and you should be good to go. If that doesn't work change the MAC on donation page and than change it in Stalker client.
so just add Serial, Device Id, Device Id 2 and Signature and you should be good to go. If that doesn't work change the MAC on donation page and than change it in Stalker client.
well i deleted the kodi version i had installed and got the newest version, when i put my pay info into the stalker client its still giving me stalker failed authorization message, and there is no tv icon out on my main panel. really starting to piss me off as it had been working fine until today and i didnt change anything.
I cant get it working either was working so nice yesterday changed my mac address made a serial number and device 1 and 2 also in auth put my login ID still wont work what a mess this drm shit is annoying
I dont get why they are making all this crap drm ugh reminds me of ubisoft in a way .... you need make this service better not worse
i also tired that stb emu and the same cant get the damn thing working!
I was really impressed with this iptv when it worked so nicely without any login or invalid serial number crap
This is the log ive been looking at this all i can get it to do is load the guide clicking on any channel says working
Hope this helps if you need more info
Another update: after hours of messing around and removing and installing kodi and downgrading and upgrading the pvr addon it finally plays wow! I didnt change any settings before and it did not work i put them all in again and it let me in i hate this new drm security crap really dont like it guys>_>
I dont get why they are making all this crap drm ugh reminds me of ubisoft in a way .... you need make this service better not worse
i also tired that stb emu and the same cant get the damn thing working!
I was really impressed with this iptv when it worked so nicely without any login or invalid serial number crap
This is the log ive been looking at this all i can get it to do is load the guide clicking on any channel says working
20:22:10 T:884 NOTICE: DVDPlayer: waiting for threads to exit
20:22:10 T:884 NOTICE: DVDPlayer: finished waiting
20:22:10 T:104 NOTICE: Stream All The Sources: Service: Playback Stopped
20:23:29 T:168 NOTICE: Thread FileCache start, auto delete: false
20:23:42 T:884 NOTICE: DVDPlayer: Opening: pvr://channels/tv/All channels/pvr.stalker_1914188463.pvr
20:23:42 T:884 WARNING: CDVDMessageQueue(player):ut MSGQ_NOT_INITIALIZED
20:23:42 T:9212 NOTICE: Thread DVDPlayer start, auto delete: false
20:23:42 T:9212 NOTICE: Creating InputStream
20:23:44 T:12720 NOTICE: Thread FileCache start, auto delete: false
20:23:44 T:9212 NOTICE: Creating Demuxer
20:24:47 T:9212 ERROR: CDVDPlayer::OpenDemuxStream - Error creating demuxer
20:24:47 T:9212 NOTICE: CDVDPlayer::OnExit()
20:24:47 T:6108 NOTICE: Thread JobWorker start, auto delete: true
20:24:47 T:884 NOTICE: CDVDPlayer::CloseFile()
20:24:47 T:884 NOTICE: DVDPlayer: waiting for threads to exit
20:24:47 T:884 NOTICE: DVDPlayer: finished waiting
20:24:47 T:884 NOTICE: CDVDPlayer::CloseFile()
20:24:47 T:884 NOTICE: DVDPlayer: waiting for threads to exit
20:24:47 T:884 NOTICE: DVDPlayer: finished waiting
20:24:47 T:104 NOTICE: Stream All The Sources: Service: Playback Stopped
Hope this helps if you need more info
Another update: after hours of messing around and removing and installing kodi and downgrading and upgrading the pvr addon it finally plays wow! I didnt change any settings before and it did not work i put them all in again and it let me in i hate this new drm security crap really dont like it guys>_>
Last edited:
i dont get any of that all mine does is fail authorization right off the get go and then nothing , i downloaded the stalker nfps and it didnt work so i used the version that came with kodi and got the same thing, i think the reason the tv icon is gone is because stalker isnt doing anything, thanks for the reply
DRM Crap? Do you know what DRM is? DRM is Digital Rights Management. IPTV does not use DRM. If you read the announcements the cause of this is because the providers now require that you enable the send serial information because most people did not enable this allowing freeloaders to hijack peoples MACs. There have been numerous threads on how to get you working again. Best place to start is the Stickies.
PVR Stalker you have to fill in all the fields in the advanced section of the PVR Client except for the Token, leave it blank. This will enable the sending of a custom serial number. Make sure you disable Live TV before you make the change and then enable it after. Might have to toggle the Live TV enabled a couple of times. If that does not work, change your MAC.
Then I would start over. Uninstall Kodi and install the latest version. Then do the following.
Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Add-ons, PVR and select the Stalker Client.
4. Select Configure.
5. Select Portal 1
6. Enter the MAC address that you generated and linked in steps 1 & 2
7. Enter the Server Address. 11.iptvprivateserver.tv
8. Set the Time Zone you’re in. You can use this site to get the correct Time Zone Name, use the TZ column: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
9. Use your donation number for both Login and password.
10. Set Guide Preference to Prefer Provider
11. Set XMLTV Scope to Remote URL.
12. Set XMLTV Remote URL to hxxp://epg.ninja/NFPSF.xml Replace xx with tt.
13. Token, leave blank.
15. Serial Number: Random Alphanumeric. Min 4 characters
16. Device ID 1: Random Alphanumeric. Min 4 characters
17. Device ID 2: Random Alphanumeric. Min 4 characters
18. Signature: Random Alphanumeric. Min 4 characters
13. Click OK to change it.
14. If using 8.0.3 PVR Client then go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml and
insure the connection_timeout value is at 60 and then save the changes.
If using a 8.0.4+ then you can simply change the timout to 60 in the settings.
16. Go back to Kodi and assuming you still have the Stalker Client Plugin up and enable the Stalker PVR Client. If not see step 3 to get back to it.
17. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.
This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.
Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Add-ons, PVR and select the Stalker Client.
4. Select Configure.
5. Select Portal 1
6. Enter the MAC address that you generated and linked in steps 1 & 2
7. Enter the Server Address. 11.iptvprivateserver.tv
8. Set the Time Zone you’re in. You can use this site to get the correct Time Zone Name, use the TZ column: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
9. Use your donation number for both Login and password.
10. Set Guide Preference to Prefer Provider
11. Set XMLTV Scope to Remote URL.
12. Set XMLTV Remote URL to hxxp://epg.ninja/NFPSF.xml Replace xx with tt.
13. Token, leave blank.
15. Serial Number: Random Alphanumeric. Min 4 characters
16. Device ID 1: Random Alphanumeric. Min 4 characters
17. Device ID 2: Random Alphanumeric. Min 4 characters
18. Signature: Random Alphanumeric. Min 4 characters
13. Click OK to change it.
14. If using 8.0.3 PVR Client then go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml and
insure the connection_timeout value is at 60 and then save the changes.
If using a 8.0.4+ then you can simply change the timout to 60 in the settings.
16. Go back to Kodi and assuming you still have the Stalker Client Plugin up and enable the Stalker PVR Client. If not see step 3 to get back to it.
17. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.
This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.
I cant get this to Work... I read , someone tried to Help and NADA....
i have windows 7 , Kodi 15.1 with the The beast on it. I made up a Mac adress 00:1A:78 :xx:xx:xx
i put in 11.iptvprivateserver.tv in PVR stalker 8.03
and changed the timeout to 60 and cant to get it load up.
on the Mac the last 6 I put all #'s is that OK ???
i have windows 7 , Kodi 15.1 with the The beast on it. I made up a Mac adress 00:1A:78 :xx:xx:xx
i put in 11.iptvprivateserver.tv in PVR stalker 8.03
and changed the timeout to 60 and cant to get it load up.
on the Mac the last 6 I put all #'s is that OK ???