Canada server not working on my SMART STB APP.I have to manually change it to All Country so it could work.A couple of hours later it goes back to Canada.I resetted the server,changed port,changed the donation code and still no results.What could be the problem?From day one I have to log in my code checker so I could manually switch it back to all country.It's starting to be a hassle.Please help!!!!!
IPTV66 Help here!
With it set to All Country , the iptv reset will not work, in other words the IP is not locked on.
Which is prolly why it randomly reverts back to Canada.
If that IP being seen is an Canadian IP and a reset is performed after setting to Canada, then it should be working.
Which is prolly why it randomly reverts back to Canada.
If that IP being seen is an Canadian IP and a reset is performed after setting to Canada, then it should be working.
Yes. I tried to disable and enable.Still no results.I think I am running out of options
it works for Rybercon when set to All Country without a reset. But then it reverts to Canada by itself and then when it does that he losses connection.
Even after a reset with it set on Canada it still does not work, until set back on All Country.
I have seen this before but do not have an answer.
It must be something to do with IP changing, maybe.
Perhaps setting this up on a Static IP may fix this (but i have my doubts since Dynamic and Static are in house networking IP settings and not internet, but I would try anyway).
You would do that thru your router, Google search on how to... then after that is set, then reset to Canada and perform another IP reset thru the website.
Check results.
Last edited:
We don't have the same problem then.I think now that i read Crazed post 12. That is most likely whats going on.Your options are what he suggests or maybe your provider can give you a static ip address or find another provider. One that don't give you a new ip everyday or every few days.Yes. I tried to disable and enable.Still no results.I think I am running out of options
yea, is what is expected with that.
But I was suggesting to first try with just making your LAN network Static
LAN (local area network or in-house)
WAN (internet network or outside-house)
There are also other settings in your router which can be accessed, like lease time-out and etc... a google search will tell you how to access all that.
But I was suggesting to first try with just making your LAN network Static
LAN (local area network or in-house)
WAN (internet network or outside-house)
There are also other settings in your router which can be accessed, like lease time-out and etc... a google search will tell you how to access all that.
i am not that smart when it comes to computers and networks but could you not just add another router (like a asus to your network and change that one to a static and then run your box through that router only..like i say i am not the sharpest tool in the shed but if was my issue that's what i would try...
on a asus router under wan you have these settings
automatic ip
static ip
pppoe
pptp
l2tp
that you can set it too
happy testing
on a asus router under wan you have these settings
automatic ip
static ip
pppoe
pptp
l2tp
that you can set it too
happy testing
think static and 8844 should work then all country's 8844 is dns should look like something like this
192.168.now this number is 1 or 0 need find that out then say 10 to 100
255.255.255.00
now gateway
192.168. 1 or 0 .1
next dns
8844 if two dns like this 8888 next 8844
to find you router number thats 1 or 0 maybe 2
in windows at bottom where it say type here to search type command prompt enter
when you get that box type this cd\ then enter
then you get c:/ type this ipconfig enter box will pop up
last one is gateway mine is 192.168.1 thats number you put in the two i said then will have .1 at end use second from end like i said find out yours maybe same or its 0 or 2 mine one so will look like this
192.168.1.12really any number to 100
255.255.255.00
192.168.1.1 this one must be one at end thats gateway numbers
8844 is dns
that how setup a box for static the red is the router number i showed you how to get your mine is 1 this is for your box not the router do not touch router at all
this may help you again this is for your box not router
if you mess up reboot and go back auto that ez
192.168.now this number is 1 or 0 need find that out then say 10 to 100
255.255.255.00
now gateway
192.168. 1 or 0 .1
next dns
8844 if two dns like this 8888 next 8844
to find you router number thats 1 or 0 maybe 2
in windows at bottom where it say type here to search type command prompt enter
when you get that box type this cd\ then enter
then you get c:/ type this ipconfig enter box will pop up
last one is gateway mine is 192.168.1 thats number you put in the two i said then will have .1 at end use second from end like i said find out yours maybe same or its 0 or 2 mine one so will look like this
192.168.1.12really any number to 100
255.255.255.00
192.168.1.1 this one must be one at end thats gateway numbers
8844 is dns
that how setup a box for static the red is the router number i showed you how to get your mine is 1 this is for your box not the router do not touch router at all
this may help you again this is for your box not router
if you mess up reboot and go back auto that ez
Last edited: