the service specifies that your URL is s2.iptv66.tv
Stick with that one, and you may get somewhere bud.
The other gives you a blocked message as you have told us, while the s2 does not give that blocked message.
Not loading thou may be to do with password.
Triple check that and also use the http prefix as floder shows (but with the 2 and not the 1)
-like this...
http://s2.iptv66.tv
Disconnect the receiver from the internet.
Ensure the server menu is setup correctly. Then power off the receiver.
Now power off your router and wait about one full minute and power back on.
Then visit the service website and ensure the MAC is linked correctly and perform a reset at the website.
Then wait about 6 or 10 minutes and connect the receiver to router again and power on.
Check for results.
ANd yes, all Mag receivers come with their own unique MAC address. You must use the MAC that the receiver shows.
Stick with that one, and you may get somewhere bud.
The other gives you a blocked message as you have told us, while the s2 does not give that blocked message.
Not loading thou may be to do with password.
Triple check that and also use the http prefix as floder shows (but with the 2 and not the 1)
-like this...
http://s2.iptv66.tv
Disconnect the receiver from the internet.
Ensure the server menu is setup correctly. Then power off the receiver.
Now power off your router and wait about one full minute and power back on.
Then visit the service website and ensure the MAC is linked correctly and perform a reset at the website.
Then wait about 6 or 10 minutes and connect the receiver to router again and power on.
Check for results.
ANd yes, all Mag receivers come with their own unique MAC address. You must use the MAC that the receiver shows.