What is wrong when----
- Thread starter kcmood
- Start date
No, I do not get beyond the first loading. It should goto a black screen that says loading and then the yellow bar. I also cannot turn it off unless I unplug the power cord.
In other words the first loading is with the infomir logo, then a black screen with a loading again then the yellow bar.
In other words the first loading is with the infomir logo, then a black screen with a loading again then the yellow bar.
I went into bios again and am where I was before. When I plug in power cord I get "loading from nand, then checking image, then loading". That is where it sits for about 30 - 40 sec and then screen goes black and it cuts off. I will add, which I should have done before, we had a thunder and lightning storm the day it went off and ever since its not working. We did not lose power but we had a powerful storm and my tv in bedroom was fried, it came thru the antenna OTA. The iptv box is in the living room.
I unplugged the cat 5 as you suggested but it still will not load. Any other suggestions?
My friend had the same problem and found out later that his kid had changed to a higher resolution thinking he would get a better picture but it locked down his mag from loading.If you make changes in BIOS make sure you hit EXIT & SAVE.My bios settings are (720p-60)(1280x720)(nand).
Code:
https://youtu.be/nXuDmmoqtxAAre You doing what this shows at 1:02 in...?!?
Not sure but, I have a MX Box that looks similar to Your STB, in the back there is the AV Port and I can stick a wooden Toothpick inside slowly till it bottoms out and then I can fell a Click which is another way to Re-Boot and Reset the STB...! Again, Not Sure if that will work with Your Stab... Other Boxes have that availability also : http://iptvtalk.net/showthread.php?36759-pin-hole-reset