Hi there,
I am using STB EMU 0.8.04 (from the link provided by reseller in the instructions) on Android 6 box and followed all the provided instruction from Rocket re-seller but its giving me a blank screen (it doesn't even give me an option for Login & Password and hence doesn't even load channels). Below is what I did:
1. Changed the Portal to 22.iptvrocket.tv
2. Updated the MAC address to what was provided (3rd set of number in the MAC was 79)
3. Closed the Application and and restart with new profile setting.
After unsuccessfully trying for multiple times. I went through all different forums and read all the different troubleshooting options and one of the option was to go on Papia0 and reset the IPTV and also changed the MAC address (3rd set of number in the MAC from 79 to 78). While I was in process of changing MAC address it gave me following warning (hence i changed it to 78):
"WARNING: If you are using an STB emulator for IPTV then you should use a MAC Address under the following range 00:1A:78:XX:XX:XX (replace XX by hexadecimal digits), or your MAC Address may be modified without any previous notice."
So I changed my 3rd set of MAC id to 78, and that didn't work either. After bit of further digging through all the different forums i learned that STB EMU doesn't work on 22.iptvrocket.tv portal. So i changed the portal to 11.iptvrocket.tv (from 22.iptvrocket.tv). But it briefly brings-up the channel loading screen (for less than a second) and then takes me to Login & Password authentication screen where I tried using the donation # for both, but gives me error. The reason may be that on Papia0 my portal is set to 22.iptvrocket.tv.
Note: I tried the same using STB EMU version 0.8.05 and also 0.8.06 but unsuccessfully (0.8.06 doesn't even take Mac with 79 and says invalid MAC)
Any help is appreciated.
I am using STB EMU 0.8.04 (from the link provided by reseller in the instructions) on Android 6 box and followed all the provided instruction from Rocket re-seller but its giving me a blank screen (it doesn't even give me an option for Login & Password and hence doesn't even load channels). Below is what I did:
1. Changed the Portal to 22.iptvrocket.tv
2. Updated the MAC address to what was provided (3rd set of number in the MAC was 79)
3. Closed the Application and and restart with new profile setting.
After unsuccessfully trying for multiple times. I went through all different forums and read all the different troubleshooting options and one of the option was to go on Papia0 and reset the IPTV and also changed the MAC address (3rd set of number in the MAC from 79 to 78). While I was in process of changing MAC address it gave me following warning (hence i changed it to 78):
"WARNING: If you are using an STB emulator for IPTV then you should use a MAC Address under the following range 00:1A:78:XX:XX:XX (replace XX by hexadecimal digits), or your MAC Address may be modified without any previous notice."
So I changed my 3rd set of MAC id to 78, and that didn't work either. After bit of further digging through all the different forums i learned that STB EMU doesn't work on 22.iptvrocket.tv portal. So i changed the portal to 11.iptvrocket.tv (from 22.iptvrocket.tv). But it briefly brings-up the channel loading screen (for less than a second) and then takes me to Login & Password authentication screen where I tried using the donation # for both, but gives me error. The reason may be that on Papia0 my portal is set to 22.iptvrocket.tv.
Note: I tried the same using STB EMU version 0.8.05 and also 0.8.06 but unsuccessfully (0.8.06 doesn't even take Mac with 79 and says invalid MAC)
Any help is appreciated.