Stalker Client Unable to Load Files

Tvhound

New member
Sep 30, 2015
29
0
0
Yes I do
Can someone help me with this issue? I have a valid MAC address through papiao NFPS.
Been trying to figure out if you have to use "Local Path" or "Remote Path" for XMLTV.
Also I am not sure why I keep getting the message Stalker Client Unable to Load clients"

I have been reading through the stickys etc but I can't seem to find a solution to my issue. Please if anyone can just point me to the right link I will be grateful. I do have a valid Mac that I paid for and it's upsetting that I can't get anything to work
 
Here's how one may look in a working manner. Stalker Client 0.8.0.

(with the 4 bottom entries, just being random input):

keiBx14.jpg
 
did ya try changing your mac? or try pvr stalker nfps <--- all ya need is the last 3 sets on your mac and donation number thats it way easier to set up..anytime i get can't load channels means my mac got corrupt i change it im good to go
 
Last edited:
Thank you everyone. I have changed my Mac addresses, I am on Kodi 15.2. I have been using PVR Stalker Client and PVR IPTV Simple Client with the same exact settings as Dinkish above but I am still getting Unable to Load Clients.
 
Put it back to Europe/Kiev to test as I'm PST and it works fine, but I don't believe changing it matters. You should check your time zone in Kodi itself though, don't know if going to system > appearance and selecting timezone\region matters.
 
it's the 7161-Stalker-Client-NFPS thread in this category.

Have you tried entering the epg link into a web browser to ensure you didn't make a typo? Are you including https:// ?

Actually I don't have a link for my epg (PVR IPTV Simple Client). It's on Local Path. This is the app with the three subheadings :General, EpG and Channel Logos
 
Don't bother with PVR IPTV Simple Client, you'd need to use ivue or renegades or a tv guide of that nature. You can use that one for m3u's or something if you want, otherwise just leave it disabled for nfps use, since you won't be able to use the ninja epg with it.

You want to use this one so you can input the values:
gsVUBN8.jpg


You'd then want to set up the info as per the previous screen shot I had, just including your mac address and donation number as necessary. It'll need to be put into the Remote URL area to get the EPG.
 
This is the one I followed to get working just fine:

Code:
[URL]http://iptvtalk.net/showthread.php?6570-Setting-up-PVR-Stalker-%28Kodi-Built-in%29&p=51883&viewfull=1#post51883[/URL]

from there you will also see how to input the EPG remote link.
Code:
https://papaio.tv/main/EPG/mac/00:1A:7[COLOR="#FF0000"]x:xx:xx:xx[/COLOR]/donation/[COLOR="#FF0000"]anddonationnumberhere[/COLOR]/fname/NFPSF1

Just input your mac into the red x's, and your donation number into the other part.
 
Last edited:
Guys,

Make your life easier and use the Stalker Client NFPS addons. All you need is your linked MAC and your donation...

Stalker Client NFPS (0.8.4 or 1.01)
http://iptvtalk.net/showthread.php?7161-Stalker-Client-NFPS

If you get "Can't load DLL" its not the add-on. It's a permissions issue on the android device. Follow instructions in following link(rooted boxes only)

http://iptvtalk.net/showthread.php?...load-DLL-(on-ROOTED-DEVICE)&p=93977#post93977

Only reason I didn't suggest it was because of people stating the servers are going to require authentication in the future, and that addon wouldn't support as of the current version.
 
Help!

I've got a donation and trying to set up on a firestick running Kodi 15.2.

I've gone through the settings above using the Stalker Client and it doesn't load the channels.

One thing i'm not clear on is the email i've received.

it states

IPTV Portal: 66.iptv66.tv
Server: 66.iks66.tv

I've tried both of these for the server address and still can't get anything working!

Can anyone help?
 
start with a fresh mac,goto iks66 and change it by one digit and save.login again and change it back to what u had if you want to keep the same one.
enter you mac
server use 66.iptv66.tv
enter a serial number max 13 digit
that it...for now.this should get the channels to load.worry about epg after you get this to work.
after you enable live tv the 1st time it will fail to load.disable/enable live tv again,it should load the 2nd time.
 
stalker nfps is way easier.select from the drop down menu's..
select your provider...nfps,rocket,iks66
enter last 3 of your mac and donation number.

you still need to reset your mac as it generates serial number internally and wont match anthing you previously enetred trying other version.
also i assume its version 1.0.1 which will automatically try to reconnect after the first fail to load so just wait it should connect the 2nd time on its own.
epg is also already setup,just select which epg u want.
 
Last edited: