Screwed up
- Thread starter romo
- Start date
I have a 254 that I have been trying to reboot as well! There was a reply to my earlier Post that the 200/250 can be re booted! This does not work for the 254 as there are no buttons on the unit to power down! I tried holding the menu key on the remote while plugging in the power but nothing worked! Hopefully the is a way to reboot the 254!
thanks
kermitii
thanks
kermitii
c/p
Mag 254 Bios
1 unplug Mag254
2 push and hold the button with 3 dots and 3 lines and plug power back in you should have a blue screen with settings.
3 Check and change your setting save and reboot
Things you may need to change
1 Video settings should be set to your TV settings
2 You should be booting from nand or nand 2 which ever that works for you.
3 Factory Reset. ( Screen shows def. setting )
Mag 254 Bios
1 unplug Mag254
2 push and hold the button with 3 dots and 3 lines and plug power back in you should have a blue screen with settings.
3 Check and change your setting save and reboot
Things you may need to change
1 Video settings should be set to your TV settings
2 You should be booting from nand or nand 2 which ever that works for you.
3 Factory Reset. ( Screen shows def. setting )