Router issues with my Z7+????

M

MauiMang0

New member
Aug 29, 2017
71
0
0
yes
#1
I am sure this issue has nothing to do with my Z7+ but after doing a lot of reading and coming up empty and since this is the box I am using I will post it here.


I recently purchased a Z7+. I was using the Buzz boxes before so this is what caught my attention. I noticed a lot of buffering with the Z7. (using the same iptv service and ISP on the Buzz, no issues)

Short story. Every time I reboot my modem and then run a Speedtest on my Z7 I get close to 100 mbps (which Is what my speed should be through my ISP). There is no to little buffering.

A day or so goes by and I notice a lot of buffering and then I do a speedtest and my speed is at 20-30 mbps (depending on the time of day). I reboot the router and back to 100 mbps.

The router is a year old, and just updated the firmware for it. When I do a speed test on my pc hardwired to the router I consistently get 100 mbps. When I do the speedtest on the Z7 hardwired to the router like I mentioned above I don't even get close to 100 mbps unless I do a speed test right after a modem reboot.

I don't even know if this makes sense to anyone I need a starting a point.
 
#7
You could submit a ticket at the formuler website and see if they have answers or knowledge of any of this


Code: 
https://support.formuler.tv/home
 
#9
See if you can set the priority for the STB connection to Highest on the Router.

Assign the STB connection a Static-IP
read Info here >https://www.howtogeek.com/184310/ask-htg-should-i-be-setting-static-ip-addresses-on-my-router/

Use Wifi instead of wired connection to see if the problem persists.
Use a quality ethernet cable that is not longer than required and route your ethernet cables away from AC cables and motorized (noise generating) devices.

Check your Routers usage stats. Maybe excessive wifi sources in your area causing excessive wifi housekeeping.

/kens
 
You must log in or register to reply here.
Top Bottom
Back
Menu