Remote Control program help

alcan

TV Addicted
Jul 23, 2015
44
0
0
no
Hello,

Can some one help to remote TV program , I have SONY 4K TV and try to program STB retore with my TV, Please can some one provide TV code or fhow to program.

Thanks in advance.
 
Code:
*************************wp-content/uploads/2017/03/How-to-program-dreamlink-T1-remote-control.pdf
try this. search link with google. its for t1 but im sure its same for t2 as well. kof
 
TV / Source Button Programming;

1. Press and hold [TV] for 5 seconds. The LED goes from blinking to solid
and STB Remote Control Unit will enter Learning Mode.
2. Press the Key to be programmed on T1 plus Remote Control Unit. LED
begins blinking slowly.
The key is now ready to accept programming.
3. Aim the TV Remote Control Unit towards the front of the Dreamlink T1
plus Remote Control Unit (the distance must be less than 3cm).
Press the button on the TV Remote control. If the T1 plus Remote Control
is programmed correctly, the LED will flash 3 times.
4. Repeat step 2-3 for other keys.
5. Exit Learning Mode by pressing any other button on the Dreamlink T1
Plus Remote Control. LED turns off.

/kens
 
TV / Source Button Programming;

1. Press and hold [TV] for 5 seconds. The LED goes from blinking to solid
and STB Remote Control Unit will enter Learning Mode.
2. Press the Key to be programmed on T1 plus Remote Control Unit. LED
begins blinking slowly.
The key is now ready to accept programming.
3. Aim the TV Remote Control Unit towards the front of the Dreamlink T1
plus Remote Control Unit (the distance must be less than 3cm).
Press the button on the TV Remote control. If the T1 plus Remote Control
is programmed correctly, the LED will flash 3 times.
4. Repeat step 2-3 for other keys.
5. Exit Learning Mode by pressing any other button on the Dreamlink T1
Plus Remote Control. LED turns off.

/kens
Thanks alot kens, I made your post a Sticky...:)