Idk why this information is nowhere to be found but i need some help. I need to get stalker client for openelec x86_64. Not the Linux arm build. I've tried that and it doesn't work and the built in 0.8.0 doesn't work either. Anyone compile it yet?
PVR Stalker client openelec
- Thread starter bloodykiller
- Start date
why are you not using the latest openelec 6.0.0?
it has pvr stalker 0.8.3 and it works fine,time for you to do a update.
it has pvr stalker 0.8.3 and it works fine,time for you to do a update.
Code:
http://openelec.tv/get-openelecI am, I'm on the latest x86_64 build for pc's. It came with pvr stalker 0.8.0 not .3 or .4. So unless you mean for RPI or arm or Android boxes. It's not there
forgot to mention after installing openelec I had no pvr clients listed.i installed 0.8.3 from openelec's mediacenter OS Addons repository.
Okay I'll check it out when i get home. Thanks. Also do you know the latest setup guide for that pvr stalker? Seems to keep changing with every release
its straight foreward
mac 00:1A:78:XX:XX:XX
server http://11.iptvprivateserver.tv
timezone America/Moncton for atlantic
America/Toronto for Eastern
America/Winnipeg for Central
America/Edmonton for Mountain
America/Vancouver for Pacific
there other zones also for America for us cities the links mentioned many times in the forums
guide preference xmltv only
remote url one of the below depending on where you got your donation,fill in missing info
you should be using NFPSF2(24hr) or NFPSF4(72hr) instead of NFPSF1
serial number upto 13 digits number
device id,1,2 min 4 digit number,max 13(I think)
signature min 4 digit number
u may have to change your mac address on papiao/iks66 site if you previously had serial,device id's,signature entered with what you were using before.changing mac address wipes the old info.
1st time you enable live tv you will get failed to load,disable/enable live tv again and it should load the 2nd time.
I am trying to compile pvr stalker 1.0.1 for generic x86_64.it will be the same as the pvr stalker nfps except all info will have to be entered as I described above vs the nfps version which is simplified.
let you know how that turns out..
mac 00:1A:78:XX:XX:XX
server http://11.iptvprivateserver.tv
timezone America/Moncton for atlantic
America/Toronto for Eastern
America/Winnipeg for Central
America/Edmonton for Mountain
America/Vancouver for Pacific
there other zones also for America for us cities the links mentioned many times in the forums
guide preference xmltv only
remote url one of the below depending on where you got your donation,fill in missing info
Code:
https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/NFPSF1
https://papiao.is/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/NFPSF1serial number upto 13 digits number
device id,1,2 min 4 digit number,max 13(I think)
signature min 4 digit number
u may have to change your mac address on papiao/iks66 site if you previously had serial,device id's,signature entered with what you were using before.changing mac address wipes the old info.
1st time you enable live tv you will get failed to load,disable/enable live tv again and it should load the 2nd time.
I am trying to compile pvr stalker 1.0.1 for generic x86_64.it will be the same as the pvr stalker nfps except all info will have to be entered as I described above vs the nfps version which is simplified.
let you know how that turns out..
Sir you are the man! Let me know how the compile goes! You literally answered every question i had
finally i can get this going on openelec because i was using iptv stalker with simple client before and every restart it fxxxxx up -_- so this has much better
Last edited by a moderator:
here's pvr.stalker 0.8.4 for openelec 6.0.0 Generic x86_64.
I thought the git had newer versions but that's the newest for isengard.
as I said its openelec 6.0.0 which is kodi 15.2 isengard,it wont work on kodi 16.
as I said its generic x86_64 so it wont work on openelec rpi,rpi2,ect.
if you have 0.8.3 or whatever installed you can install right over top of it(worked for me).if in doubt uninstall older version first.i would even remove the folder form /storage/.kodi/userdata/addon_data.
advantages of installing over top old version is it keeps your settings.
I will see if I can get the source for pvr stalker nfps 1.0.1 for kodi 15.2 from dvbken and compile it.
I thought the git had newer versions but that's the newest for isengard.
as I said its openelec 6.0.0 which is kodi 15.2 isengard,it wont work on kodi 16.
as I said its generic x86_64 so it wont work on openelec rpi,rpi2,ect.
if you have 0.8.3 or whatever installed you can install right over top of it(worked for me).if in doubt uninstall older version first.i would even remove the folder form /storage/.kodi/userdata/addon_data.
advantages of installing over top old version is it keeps your settings.
I will see if I can get the source for pvr stalker nfps 1.0.1 for kodi 15.2 from dvbken and compile it.
Code:
https://mega.nz/#!agBRkSJS!-_5mLCN0obAonOKNnst4hPkGV8oNWo0WPBtzEv7AvOY
Last edited:
here's pvr.stalker nfps 0.8.4 for openelec 6.0.0 Generic x86_64.
its the same as above but the simplified setup.
this will work until they implement the use of username/password.
its the same as above but the simplified setup.
this will work until they implement the use of username/password.
Code:
https://mega.nz/#!f0IUxT5B!vENBLpW0RpK1hw_tuhPeT-ufXaChHuk9Ex2qwlbgZWs
Last edited:
Very nice! Thank you very much. And I'm sure there's a bunch of others here week were also looking for these. I didn't realize it was in their repo. I was using the preloaded one which never worked. And now you made the latest ones for both which openelec hasn't had. Tyvm man for all the help and quick replies!
I knew i couldn't be the only one!! Lol until he told me they were actually in the openelec repo i had no idea lol but now he gave us the latest ones! You should tell the guys from openelec so they can stick it in their repo
I'm actually still getting an error when trying to load it. But, i'm far from an expert on this I really do super appreciate the compile though.
I really do super appreciate the compile though.I'm actually still getting an error when trying to load it. But, i'm far from an expert on this
Remember if you're on 15.2 you have to use the 0.8.4 version. Just tried it and worked instantly
I also have Openelec 7.0(development nightly build) kodi 16 compiled and stalker 1.0.1(not the nfps version).I havnt tried either yet as 15.2 and 0.8.4 works good for me.if anyone want to try them just say.
Any Help appriciated. I an running Openelec on a Nuc 15.2 installed the stalker nfps i configured it and enabled both the app and live tv setting many times. Each time it tells me there is no enabled pvr client. i have rebooted multiple times and enabled the Stalker app but i get the same result. It will not load any channels or even show Tv in the main home screen. Any idea what i may be doing wrong. I really was hoping to get my Rocket to work here. Thanks
Last edited:
The newer Openelec builds don't support 32 bit based computers, guess I'm gonna have to use that one for just my stored movies. UPnp still works though.