package installer

[jmw1254]

Having a problem with the package installer TV online downloads 100% on the top line the bottom line continues to roll any suggestions..?

 

[Marley]

wait tell it stops

 

[jmw1254]

I let it run all night last night maybe about 6 to 8 hours still running this morning when I woke up

 

[Farmer1]

you can try and reset you box unplug for 10 seconds and plug it back in it has worked for me in the past
if that doesn't work try a manual factory reset

C/P avov

[FONT=&quot]Manual Factory Data Reset.[/FONT][FONT=&quot][/FONT]
[FONT=&quot]1)[/FONT][FONT=&quot] Make sure the box is connected to the TV by HDMI or RCA
2) Make sure the power is plugged out of the box
3) Push and hold the reset button with the pin for 10 seconds
4) Continue to hold it down and plug the power into the box
5) Hold the reset button for at least another 5 seconds and then let go
6) Proceed to wait for a bit while the box resets, it should open up again in console mode
7) Select the factory data reset option
8) The box will perform a factory data reset and reboot
9) It should then boot normally and start working. If it boots into the console mode again, make sure to just select perform normal boot up (I believe it is the first option)[/FONT][FONT=&quot][/FONT]

 

[mbry]

I had the same issue. What I did was let it try loading. After it does not complete go to your system updates and it will be there, just click install. Major update with different backgrounds. 1.0.6 build

 

[Marley]

yea check system and see if the update says good