Mandatory Update

BIO

BIO

Super Moderator
Oct 31, 2014
1,252
2
0
#1
UPDATE APR 29
No need to update manually anymore, it will now update itself after a factory reset.

Copy/Paste

TVonline:

Step 1: Check which is your build number by going to: “settings > system info > build number”

Step 2: If you have build 1.0.07: Download the second file below
If you have build 1.0.08: Download the first file below
**Rembmer: do not extract any of the “update.zip” file, just copy it over

Step 3: Place the correct build update.zip file on a USB/Jump drive (do not extract or change file name)

Step 4: Plug in the USB/Jump drive to the back of the device and power up your device

Step 5: A Firmware update message will pop up and click “install”

Step 6: Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings > system info > build number”. Now you should be able to access MickyHop channel store once again.

Please follow these 6 steps to complete the software update for your VIXO 1 or TVonline device. Make sure you download the correct update.zip file for your build. If you require more assistance please open a ticket at our help desk.
 
Last edited by a moderator:
#7
you need the mandatory update, it's posted here on site, make sure you use the correct one based on your build #, thks..
see post #1..
 
Last edited:
#12
download the zipped file to desktop, insert zip drive in puter, move file just as it is in zipped format to zip drive and follow BIO's instructions...the file works fine..been verified..
 
#16
Step 2: If you have build 1.0.07: get the file
If you have build 1.0.08: get the file
**Rembmer: do not extract any of the “update.zip” file, just copy it over
 
You must log in or register to reply here.
Top Bottom
Back
Menu