MAG 254: New Firmware Update 0.2.18-r11-254 !

EPAPRESS

EPAPRESS

New member
Feb 15, 2015
102
0
0
#1
2LqYNOlk_bigger.png


Hello from Freiburg, Germany!

Today I booted my MAG 254 and a window popped up: New Update !

Device info is telling now: RootFS Version: 0.2.18-r11-254 Wed Mar 18 17:58:59 EET 2015

I did the Firmware update with F1 and it rebooted fine. Now we must look for the new Features.

The first I saw was that now in Servers also the MAG 254 can set more than two Portals like on the AuraHD Plus and AuraHD International Second Edition boxes. Nice!

F1 More: Opens Multportal mode for 8 Portals max.


a4a777dlS98Q.gif

Manfred
 
Last edited:
#7
EPAPRESS said:
2LqYNOlk_bigger.png


Hello from Freiburg, Germany!

Today I booted my MAG 254 and a window popped up: New Update !

Device info is telling now: RootFS Version: 0.2.18-r11-254 Wed Mar 18 17:58:59 EET 2015

I did the Firmware update with F1 and it rebooted fine. Now we must look for the new Features.

The first I saw was that now in Servers also the MAG 254 can set more than two Portals like on the AuraHD Plus and AuraHD International Second Edition boxes. Nice!

F1 More: Opens Multportal mode for 8 Portals max.


a4a777dlS98Q.gif

Manfred
Click to expand...

Thanks for posting. I did the update. However, I am now able to use a third server. great update.
 
#9
EPAPRESS said:
2LqYNOlk_bigger.png


Hello from Freiburg, Germany!

Today I booted my MAG 254 and a window popped up: New Update !

Device info is telling now: RootFS Version: 0.2.18-r11-254 Wed Mar 18 17:58:59 EET 2015

I did the Firmware update with F1 and it rebooted fine. Now we must look for the new Features.

The first I saw was that now in Servers also the MAG 254 can set more than two Portals like on the AuraHD Plus and AuraHD International Second Edition boxes. Nice!

F1 More: Opens Multportal mode for 8 Portals max.


a4a777dlS98Q.gif

Manfred
Click to expand...

Question here: When multiple portal mode is selected, I can no longer switch portal. Whenever I do a portal reload, it goes back to the same server (default server). How do I switch between portals when the multiple server mode is selected? Or should I open a new thread for this question? Thanks
 
Last edited:
#11
Went in to inner portal and it loaded the latest software RootFS Version: 0.2.18-r11-254 Wed Mar 18 17:58:59 EET 2015. I have mine set to auto update and as soon as I went into the inner portal it loaded the the new r11 software.
 
Last edited:
#12
And now - with this r11 update - both MAG devices, the MAG 250 and the MAG 254, are more than ever!

Since today I have 4 Portals on my MAG 254 to use. Wonderful!

OK, my other devices: AuraHD Plus (MAG 255/AuraHD2) and AuraHD International Second Edition (MAG 255/AuraHD8) had this fine Multiportal mode also in Firmware r10...

But also my AuraHD International Second Edition has got a new update:
Build 0.2.18-r11-255


a4a777dlS98Q.gif

Manfred
 
Last edited:
#13
alphablondy said:
I went to the inner portal to update as well. F1 does bring up a new menu for additional portals. I guess you have to fill out portal 2 in order to get the full 8.
Click to expand...

Are you able to switch between portals after activating multiple portals? For me I can only access the default server that it is set to, whenever I select "reload portal". I am able to access the inner portal through "Go to the inner portal".
 
Last edited:
#14
not sure what you mean jimmy but once your in the inner portal , click settings, system settings, servers, this brings you to Portals. 2 are listed , you have to select F1 for more, then turn on multiportal mode to gain access to the 8. hope that helps.
 
#15
I also did the new updated went into inner portal it automatic down loaded the new r11 software. Thanks guys keep up all the good work staff and members!!!
 
#17
alphablondy said:
not sure what you mean jimmy but once your in the inner portal , click settings, system settings, servers, this brings you to Portals. 2 are listed , you have to select F1 for more, then turn on multiportal mode to gain access to the 8. hope that helps.
Click to expand...

I did that and I can access up to 8 servers too. The thing is I am using three servers, (two others plus iptvprivateserver).

My problem: Before activating the multiple portals, I could switch from one portal/server from any particular server, by pressing RELOAD PORTAL, then I will see an option to load the embeded server or load the other two servers. So if I am in the IKS server, and I press the settings and chose RELOAD PORTAL, and then OK at the prompt if I want to restart portal, I will see the four things. EMBEDDED PORTAL, THE TWO PORTALS I CONFIGURED, & SYSTEMS SETTINGS. However when multiple server is activated, and restart the portal, the DEFAULT portal is loaded automatically. But should I chose to steam from another server and select the RELOAD PORTAL from within that server, it will ONLY load back the server that is configured as the default server. So if IKS is in portal 2 and another server in portal 1 is the default server, I cannot access IKS, and the same if I switch IKS that is still in portal 2 as the default, then I can only access IKS because it is the default server.

So my question to you is? Do you have more than one servers activated (F1) and if so, how do you move from one to the other?
 
#20
jimmyboscom said:
I did that and I can access up to 8 servers too. The thing is I am using three servers, (two others plus iptvprivateserver).

My problem: Before activating the multiple portals, I could switch from one portal/server from any particular server, by pressing RELOAD PORTAL, then I will see an option to load the embeded server or load the other two servers. So if I am in the IKS server, and I press the settings and chose RELOAD PORTAL, and then OK at the prompt if I want to restart portal, I will see the four things. EMBEDDED PORTAL, THE TWO PORTALS I CONFIGURED, & SYSTEMS SETTINGS. However when multiple server is activated, and restart the portal, the DEFAULT portal is loaded automatically. But should I chose to steam from another server and select the RELOAD PORTAL from within that server, it will ONLY load back the server that is configured as the default server. So if IKS is in portal 2 and another server in portal 1 is the default server, I cannot access IKS, and the same if I switch IKS that is still in portal 2 as the default, then I can only access IKS because it is the default server.

So my question to you is? Do you have more than one servers activated (F1) and if so, how do you move from one to the other?
Click to expand...


you r right.....with only 2 portals you can switch back and forward reloding the portal....with multiple on you can only load 1 and to load the other one you have to reset every time...
The way I solved is using 2 private servers in my #2 slot (with SIPTV) and NFPS in #1 slot
 
You must log in or register to reply here.
Top Bottom
Back
Menu