mag 254 how to update firmwear

D

donlaw

New member
Dec 6, 2014
16
0
0
#1
hello after doing a default setting i tried to do a softwear update but keep getting wrong signature is that because of the url in the update settings heres whats is in there
Code: 
http://mag.informir.com.ua/254/r2/imageupdate

thanks in advance if anybody has any idea how to remedy this.
 
Last edited by a moderator:
#3
ok sorry about that yes i was in the inner portal and when i try a software update it trys but comes up wrong signature and my current version is 0 and the new version says it is 218.
 
#6
That looks like the right url, but someone last night was having trouble using it also. Try this while in the inner portal ::

From the Guide said:
Go to "Settings" and go to "Auto update software" and make sure "Auto update" is enabled, if not change it now and press "OK" to save. Leave update to beta versions off. This will periodically check for updates online and install them as needed for you. You can press the green button (F2) now if you wish to manually update, or it will update after you reboot later. Exit back out to "Settings" now.
Click to expand...
 
#7
when i try to update from inner portal a box pops up it says
current version. 0
description. factroy image
date. n/a
and when i hit theF1 key to update it just says wrong signature
 
#10
Okay Don..just did this on my box...in outer portal go to settings>scroll down to inner portal, ok>scroll to settings, ok> go to system settings and scroll down to update software..make sure you have chosen HTTP in top box, then ok to verify, then F1 to update, box will reboot automatically when finished
 
#15
hi did another default setting reset still the same the box still works ok just can not update it was working before i did the default setting ,now when it boots no image on loadiing ,in tne inner portal under server then more the update url is empty not sure if had address in there before i did a default settings
 
#17
try this simple thing, might help.

Disconnect the Ethernet or turn off wifi if running wifi.
Disconnect the power.
Disconnect any USB devices connected.

Reconnect the power and let it boot up.
Reconnect Ethernet.
Check results.
 
#19
I don't know what the tv france logo looks like so need to ask, did you buy this from infomir? Asking because they do sell stbs to companies that have modified software, or so the website says. If the stb is a modified version it may never update.
 
#20
hi yes bought it from another company here when it booted up a tv france logo showed up saying loading from nand then loading from image with another tv france logo then to menue but it was updating before i did a default setting in the bios,now it boots blue screen saying loading from nand then to the checking image and that second tv france logo is shown,it still works ok but when i try a update it gives that wrong signature error.i email the place where i bought it in montreal they might have added the tv france stuff because it came with a 30 day trial of tv france.
 
You must log in or register to reply here.
Top Bottom
Back
Menu