I am using emulator 6.11 and this is what I did

H

hotwarmguy

TV Addicted
Dec 13, 2014
304
3
0
#1
how to fix
1 start STB emulator
2 press Menu button
3 select settings
4 select Profiles
5 select Rocket
6 change Serial number to any 13 digits and select OK to save
7 select Device ID (scroll down or it at the bottom of page)
8 select Reset Device ID to default value and select OK to save
9 press return button on your remote to STB emulator main page
10 press Menu button and exit STB emulator
11 wait 1 minute and re-start STB emulator and wait few minutes.

reply if it works.

Thanks.
 
#2
yessssssssss it is working good thanks for the support good workkkkkk.

one more Question do i have to do that for the MAG 254 as well because my friend has one and he was saying to me that he has some issues in connection
and one more thing since you are a good supporter do you know when we will have international channels added to IPTV Mag 254 please we have many friends
very interested in this.just if you can

Thanks
 
Last edited:
#3
roberto123 said:
yessssssssss it is working good thanks for the support good workkkkkk.

one more Question do i have to do that for the MAG 254 as well because my friend has one and he was saying to me that he has some issues in connection
and one more thing since you are a good supporter do you know when we will have international channels added to IPTV Mag 254 please we have many friends
very interested in this.just if you can

Thanks
Click to expand...

For Mag254 you need to go to Mag section for qustions.
No one knows when we are getting new channels.
 
#19
hotwarmguy said:
how to fix
1 start STB emulator
2 press Menu button
3 select settings
4 select Profiles
5 select Rocket
6 change Serial number to any 13 digits and select OK to save
7 select Device ID (scroll down or it at the bottom of page)
8 select Reset Device ID to default value and select OK to save
9 press return button on your remote to STB emulator main page
10 press Menu button and exit STB emulator
11 wait 1 minute and re-start STB emulator and wait few minutes.

reply if it works.

Thanks.
Click to expand...

I am using STBemu v 6.0.16 & I got the above instructions to work, However I also got a custom Device ID, it is handy for people who want to use other devices (kodi, emulators..etc) with same MAC address.

INSTRUCTIONS TO USE CUSTOM DEVICE ID, Rather than a LONG one that is generated.

1 start STB emulator
2 press Menu button - Settings - Profile
3 select your appropriate server (NFPS/ROCKET/IK66) (Proper URL of the server needs to be added in PORTAL URL under PORTAL Settings)
4 Enter your MAC Address (00:1A:78:XX:XX:XX) (Replace XX with your proper number/letter!)
5 Enter a Serial Number (any 13 digits and then select OK to save)
6 select Device ID :
A) Make sure first option "Use MAC-BASED DEVICE ID" is Unchecked
B) Scroll to "DEVICE ID" and enter any set of numbers and letters (I used a 23 character long ID with number and letters, you may be able to use shorter or longer (Not 100% sure!))
C) Make sure "SEND DEVICE ID" is checked

7 press return button on your remote to STB emulator main page
8 press Menu button and exit STB emulator
9 Restart STB emulator and the portal should load all the programming

*If it still gives error, Change your MAC Address to a random address and then Change it back to your real one, then restart STB emulator and it should work.

** If you use another device with same MAC, copy the SAME "mac" & "serial number" & "device id" into the settings of that device and then both will work (one at a time of course)

Enjoy
 
You must log in or register to reply here.
Top Bottom
Back
Menu