Factory reset file for T1
Please do the following
-. unzip the attached file : _recovery_facinit
-. store this to USB stick.
-. connect to T1
-. Power on T1 and press channel up button on remote control until "system update" message pops up.
-. wait until T1 booting is done.
EDIT: store that " _recovery_facinit" to root (top folder) folder of your usb stick memory.
and when you power on T1, you should click channel up button continuously until recovery menu pops up.
and do not touch anything until everything done.
Use this one:
Read other posts below before trying this method
That is the correct file.
Reset file contains just a command in it.
The Zip file is actually 148bytes
Insert a USB Memory stick in your USB Port on your PC.
Click download and when its done, it will appear on the bottom left corner of browser
(On Chrome anyway)
. If you have WinRar or WinZip it will say _recovery_facinit.zip.
Click the little ^ bultton and click Show In Folder.
Once there, right click on that zip file and Select Extract Here. You will see a new file pop up. named recovery_facinit. Now, right click that file and select Send To from the Menu.and direct it to your USB Drive(usually, E or F or G). then insert that USB Drive into the T1(+) and
Power on T1 Plus and press channel up button on remote control until "system update" message pops up.
-. wait until T1 Plus booting is done.
Please do the following
-. unzip the attached file : _recovery_facinit
-. store this to USB stick.
-. connect to T1
-. Power on T1 and press channel up button on remote control until "system update" message pops up.
-. wait until T1 booting is done.
EDIT: store that " _recovery_facinit" to root (top folder) folder of your usb stick memory.
and when you power on T1, you should click channel up button continuously until recovery menu pops up.
and do not touch anything until everything done.
Use this one:
HTML:
http://www.mediafire.com/file/7xwjkxalnn01ebj/_recovery_facinit.zipRead other posts below before trying this method
That is the correct file.
Reset file contains just a command in it.
The Zip file is actually 148bytes
Insert a USB Memory stick in your USB Port on your PC.
Click download and when its done, it will appear on the bottom left corner of browser
(On Chrome anyway)
. If you have WinRar or WinZip it will say _recovery_facinit.zip.
Click the little ^ bultton and click Show In Folder.
Once there, right click on that zip file and Select Extract Here. You will see a new file pop up. named recovery_facinit. Now, right click that file and select Send To from the Menu.and direct it to your USB Drive(usually, E or F or G). then insert that USB Drive into the T1(+) and
Power on T1 Plus and press channel up button on remote control until "system update" message pops up.
-. wait until T1 Plus booting is done.
Last edited by Captainkangaroo; Today at 02:16 AM.
Last edited:
