Dreamlink T1 Plus - Server Set-up with MAC attached

crazed 9.6

crazed 9.6

Transparent Wall Technician
Oct 31, 2014
14,069
108
63
#1
First thing we need to do is get the MAC address of T1 Plus receiver.
You can find this either on a stickier found on the underside of the receiver or in the DOL app onboard your T1 Plus.
With that MAC in hand and your Server credentials, go to your server website and attach the MAC to your Donation/Route activation code.
Perform an IPTV Reset while at the website as well.

Okay, next we will install the DreamOnline or DOL app, if not already done so.
You can find this app in your Market.

Once installed, open it and click on the Edit function.
Here is where we will add the Server Nickname (any name of your chose will do).
Click on the slot and the Keypad will appear.
Enter the name.
Exit to save.

Do not use the OK function that you will see in that server menu to save each entry. If you do and are not finished all the entries, then there will be a server connection error and you will have to start over again with the Nick-name and so on.

Next is the Server URL starting with http://
Click on the slot and the Keypad will appear.
Enter the Server URL
Exit to save.

Check the Credentials box.
This opens the User ID and the Password slots.

BUT guys, for now....
Set up the server in the Dreamlink server menu without the username and password added.
Keep the MAC attached/linked, but do not use the credentials (user and pass), in the Draemlink server setup menu.

It is not needed at present time to use credentials thru the server setup, long as your MAC has been attached to your code.

Once exited and saved the final slot, then we can click on that OK function. But before you do, look over the slot entries one more time to ensure they are correct.
Okay, click on the OK function found in that server setup menu screen.

You should now see a loading icon with a percentage countdown. Once that is complete, your channels should now appear. If the channel does not pop right in, change the channel till you do get them to pop in.

There is an EPG button on your remote. Use that to bring up the EPG.
You can scroll up and down while in the EPG, or left or right to see what is on at an earlier time or a later time on any given channel.

While viewing channels you can also simply scroll up or down, or you can use the OK button on the remote to bring up a channel list which will show on the left hand side of the screen.

To bring up VOD or Live TV....
You can also use the VOD and Group buttons on your RCU to do these functions with.

There are other functions that you can find (favorites and etc...) and fool around with till you get to know how it all works.

Exit out to also get to the DOL screen and choose VOD or Live TV or Settings.

That's it... now it's time to enjoy your LiveTV and VOD channels :)
 
Last edited:
#8
Ok so every step we will have to SAVE
What is the SAVE on the remote?..Thanks

Update
When I put the Ip or whatever in the menu I hit exit and I lose whatever I put into the menu.
Will it work if I hit Exit and then OK?(to save each line I put into the menu?}And hit OK at the end?
 
#9
johnnyse said:
Ok so every step we will have to SAVE
What is the SAVE on the remote?..Thanks

Update
When I put the Ip or whatever in the menu I hit exit and I lose whatever I put into the menu.
Will it work if I hit Exit and then OK?(to save each line I put into the menu?}And hit OK at the end?
Click to expand...

The Exit alone, should be the right one to use to save :eek:
 
#10
Still having problems with connecting with Rocket

1st Imput Service Address (Rocket}Hit Exit on Remote
2nd Http://1.iptvrocket.tv,,and then hit Exit on remote
3rd Click on Certificate (don't use remote for exit}
4th Put ID numbers in and Password in(still don't use Exit on remote}
5th Click on OK in the edit service area.

Once all that is done the program starts searching but stops after a min and says problems about my connection.
What can I be doing wrong?Provider knows my Mac address.Thanks
 
#11
johnnyse said:
Still having problems with connecting with Rocket

1st Imput Service Address (Rocket}Hit Exit on Remote
2nd Http://1.iptvrocket.tv,,and then hit Exit on remote
3rd Click on Certificate (don't use remote for exit}
4th Put ID numbers in and Password in(still don't use Exit on remote}
5th Click on OK in the edit service area.

Once all that is done the program starts searching but stops after a min and says problems about my connection.
What can I be doing wrong?Provider knows my Mac address.Thanks
Click to expand...

With mine, i never check the certificate box. For me i have never had to add credentials (username and password). I usually just add the http:// hit exit and then connect my service. Make sure your box has the correct date and time when you first start the box. If it doesnt that means you are not connected to the internet. but try it again without clicking on the certificate box just leave it empty.
 
  • Like
Reactions: crazed 9.6
#12
regional said:
With mine, i never check the certificate box. For me i have never had to add credentials (username and password). I usually just add the http:// hit exit and then connect my service. Make sure your box has the correct date and time when you first start the box. If it doesnt that means you are not connected to the internet. but try it again without clicking on the certificate box just leave it empty.
Click to expand...

i am new iptv i have dreamlink t1 plus can you show me how to set where can i go may be one setup step by step
thanks you
 
You must log in or register to reply here.
Top Bottom
Back
Menu