no that box is made for both
Put factory file on it. Then factory reset.
http://ftabeta.com/showthread.php?t=77981
Put the 303 test file on it. Then factory reset.
http://ftabeta.com/showthread.php?t=77980
Go to settings
Then satellite
Then on ch search
Search mode...auto
Select satellite..you know like 110..119 ..129 they have to do it one at a time...like 110 first ..119 second and 129 3rd but it don’t matter which one they start with.
Then antenna setup...click ok on remote
Pick lnb type
Pick diseqc setup and choose what they have
Then chose what port
Legacy sw..turn off or on if they use that
Then make sure lnb power is on
22khz tone...me I don’t use that so mine is off
Then click ok when all is right
Chose search start to get the ch
To get your server on it do this,
Go to System. Under System scroll under that to Satellite.
Click ok on remote.
Now go to Networking click ok on remote.
Scroll to the right for server 1 click ok on remote.
A page will come up.
That's where you place your ps info's.
Use ok button to get into all,
Leave Protocol as Newcamd
Lable name. i use the rocket url for it. Like if your on 2.rocketserver.tv thats what i myself put in there.
Server Ip is next. which if your on 2.rocketserver.tv thats what you put in there unless you are using the ip for 2.rocketserver.tv
Ports thats where you put your port so again if your using 2.rocketserver.tv you place in 35922
Connect on Init leave that as disabled.
Key well that's the des key which is 6103403445406970987123412134
Then username and password. Both those places you put your donation code.
When done click the start button.
Pretty easy stuff really.
Kodi you have to load your own sources.
but a new bin will be out soon for dp lnb and other fixes
