Confused on what to use

matrixebiz

unbanned christmas
Jul 27, 2015
264
0
0
yes i do
What program are we supposed to use with iVue once IPTV Stalker is finished? I have all my channels linked in the guide already so how do I transfer these settings over to the new IPTV Kodi system so I don't need to re-link all my channels? Thx
 
Unless something changes, IPTV Stalker and iVue will no longer be a means for connecting to the service once username and password authentcation is adopted. If you use a PVR, there is an associated program guide. You might want to look at the PVR Stalker thread in preparation. You can get a PVR up and working in advance of the changes.
 
of cause.. I only been using the pvr since I subscribed half a year ago soon..

edit: you need use the stalker.pvr that comes with 15.2 or 16 beta and not the one in the 1'st link.
stalker.pvr.nfps does not support login/password.

pvr.stalker.nfps only works with 15.2 as it is right now, and not on anything higher than KitKat if you are running android.
 
Last edited:
hold on there..
you need to use the buildin or the pvr stalker that comes with kodi..
pvr.stalker.nfps does not have login/password at this time.

i am sorry! idont know what i was thinking. the refrigerator must be leaking poisoned gas.
 
Last edited:
Okay, but how do I use Stalker Client and configure it to work with iVue or EPG Ninga?

but apparently even though pvr.stalker.nfps has login/password, due to the servers not having that yet, I can just leave it blank for now.
 
yes leave login blank for now, you do no need ivue anymore, the epg will be fully integrated in kodi as it should be

put in serial, and all that stuff as in iptvstalker.
you need to use a different portal url than iptv stalker, depending on your version of kodi, i posted them below.
enable it first time it will fail i dont know why. but just tre-enable the addon or restart kodi.

here is a rough guide: http://iptvtalk.net/showthread.php?9506-For-all-those-running-Kodi-and-Stalker-Client
-
portal urls:
Code:
for kodi 15.2: (isengard)
NFPS - http://11.iptvprivateserver.tv
Rocket -  http://11.iptvrocket.tv
IPTV66  - http://66.iptv66.tv

for kodi 16 beta (Jarvis)
NFPS - http://portal.iptvprivateserver.tv/stalker_portal/c/
Rocket -  http://portal.iptvrocket.tv/stalker_portal/c/
IPTV66  - http://mw1.iptv66.tv/stalker_portal/c/
when you got that running you need to setup epg, you can leave it blank but then you only get some channels.
look in the epg section of this guide, this can also help you setup the other stuff if it fails: http://iptvtalk.net/showthread.php?9506-For-all-those-running-Kodi-and-Stalker-Client

you can also look at number two link you posted, basically you need to put a customized url in the xml guide field that goes like this:
Code:
nfps or rocket :  https://papaio.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxx/fname/<guide>
iptv66:  https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/<guide>

Replace "<guide>" with the following:
NFPSF1 - English
NFPSF2 - English, non DST
NFPSF3 - Full
NFPSF4 - Full, non DST
replace the xx with your mac and donation.
i know it might look overwhelming, but if you take it step by step, and look at the guides its really not. i just added some caveats.
after you got the hang of it's as simple as iptv stalker and ivue.
 
Last edited:
yes leave login blank for now, you do no need ivue anymore, the epg will be fully integrated in kodi as it should be

put in serial, and all that stuff as in iptvstalker.
you need to use a different portal url than iptv stalker, depending on your version of kodi, i posted them below.
enable it first time it will fail i dont know why. but just tre-enable the addon or restart kodi.

here is a rough guide: http://iptvtalk.net/showthread.php?9506-For-all-those-running-Kodi-and-Stalker-Client
-
portal urls:
Code:
for kodi 15.2: (isengard)
NFPS - http://11.iptvprivateserver.tv
Rocket -  http://11.iptvrocket.tv
IPTV66  - http://66.iptv66.tv

for kodi 16 beta (Jarvis)
NFPS - http://portal.iptvprivateserver.tv/stalker_portal/c/
Rocket -  http://portal.iptvrocket.tv/stalker_portal/c/
IPTV66  - http://mw1.iptv66.tv/stalker_portal/c/
when you got that running you need to setup epg, you can leave it blank but then you only get some channels.
look in the epg section of this guide, this can also help you setup the other stuff if it fails: http://iptvtalk.net/showthread.php?9506-For-all-those-running-Kodi-and-Stalker-Client

you can also look at number two link you posted, basically you need to put a customized url in the xml guide field that goes like this:
Code:
nfps or rocket :  https://papaio.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxx/fname/<guide>
iptv66:  https://iks66.tv/main/EPG/mac/00:1A:7x:xx:xx:xx/donation/xxxxxxxxxxxxx/fname/<guide>

Replace "<guide>" with the following:
NFPSF1 - English
NFPSF2 - English, non DST
NFPSF3 - Full
NFPSF4 - Full, non DST
replace the xx with your mac and donation.
i know it might look overwhelming, but if you take it step by step, and look at the guides its really not. i just added some caveats.
after you got the hang of it's as simple as iptv stalker and ivue.
Okay, I'll give it a go, Thx and yes, I'm a bit overwhelmed. Do you have some pictures of what the Guide looks like when all setup please and is it easy to remove the channels I do not want in the list?
 
Last edited:
Okay, I'll give it a go, Thx and yes, I'm a bit overwhelmed. Do you have some pictures of what the Guide looks like when all setup please and is it easy to remove the channels I do not want in the list?

There are a few different options for displaying only the channels you want to have displayed. There are stickies for Channel Template Loader and another I don't recall the name of ATM, but the easiest (albeit tedious/time consuming) is to do this right from within KODI. In the PVR, bring up the context menu (press C on the keyboard or right click), select Manage, then Channel Manager. This will load all of the channels and you highlight each channel and there will be an area on the right side of the screen that you click to enable/disable the channel and same goes for the guide. This takes about 10 to 15 minutes or so to do if you are getting rid of all but the English channels. It took me 15 mins to hide all the music, sports, porn and other languages in my rig.

BTW, why not go ahead and enter your donation in the user & password fields now and then when the change does occur you won't get an error stating 'unable to load channels'? It's not going to affect use now.