I originally bought a avov fuse box but the issue was it didn't update, so i returned the box and got a tvonline plus instead got two boxes already but they still wont update i go to system info then update it just sits there like all the other boxes, just wondering if it is a problem a lot of people are facing and possibly how to fix it. i made a ticket on the their help desk and they just said " Thank you for bringing this up to our attention. We are currently looking into this and we will provide an update shortly. Thank you for your patience. " and still have not received an update or anything like that.
Avov boxes won't update
- Thread starter Ghost2k
- Start date
1.0.4. It made updates on startup, but still the same version. Pressing system update doesn't do anything.
what I have seen with avov receivers is that even if it takes the update, there are occasions that the version number does not change or changes but not to the version number expected.
This seems to be a glitch. I have experienced this a few times. I did not know if the update actually took.
So I investigated what the update was suppose to improve on and sure enough the avov had that improvement, so in fact the update did load but the number showing was incorrect.
That one was an update that also brought a different menu screen onto the Fuse and so it was easy to see that it worked.
I would not worry about the incorrect version number showing. If the Manual update options says there is no new update because your receiver is up to date, then that is what you would believe.
unless this is some other issue , as I see Ghost2k had sent it to avov ?
This seems to be a glitch. I have experienced this a few times. I did not know if the update actually took.
So I investigated what the update was suppose to improve on and sure enough the avov had that improvement, so in fact the update did load but the number showing was incorrect.
That one was an update that also brought a different menu screen onto the Fuse and so it was easy to see that it worked.
I would not worry about the incorrect version number showing. If the Manual update options says there is no new update because your receiver is up to date, then that is what you would believe.
unless this is some other issue , as I see Ghost2k had sent it to avov ?
Last edited:
The tvonline+ that i bought a month ago updated fine to 1.0.7. I see changes on the wallpapers and the setting menu.
The second tvonline+ bought over the weekend don't seem to have made any changes after the update which i believe the update didn't come through.
The second tvonline+ bought over the weekend don't seem to have made any changes after the update which i believe the update didn't come through.
yea a factory reset should work but have box plugged into the ethernet when it boots up a package installer should load if you dont get that it will never update that most of problem many have need to have that install first if wireless will update the package installer after you connect to box
The only time the package installer loaded was the first time i turned it on. It started installing then got stuck at about 80%. Waited for 15 mins. Nothing happened. I ended resetting the box to factory... after factory reset the package installer never appeared
The package installer doesn't load at all most of the time nothing happens once in a blue moon I'll get a message like no image found or something. Hopefully they will have this worked out by tommorow they said they were working on a fix for it. If you guys have any issues with your boxes hxxps://help.avov.tv/portal/home
go to that site and open a ticket their help service is pretty good. Just hope they can fix the problem.
On factory resets a package installer does load but doesn't update to the latest version.
go to that site and open a ticket their help service is pretty good. Just hope they can fix the problem.
On factory resets a package installer does load but doesn't update to the latest version.
Good info on other way to factory reset your AVOV .
C/P
You might want to do a factory reset straight through the console on the device. If what everybody else says doesn't work, try the following.
1) Unplug the power from your device but keep the HDMI in.
2) Get a pin or toothpick or something and press and hold the small reset button next to the power on the back of your box.
3) Hold the button for 10 seconds and while holding the button down, put the power plug back in.
4) Continue to hold the button for another 5 seconds and then let go of the button.
5) The box will reboot into console mode and from here you will select factory data reset.
6) Let the box reboot and now any software issues should be gone. If you for some reason load into the same screen, click the normal boot up which is the first option.
7) Your box should now work just fine.
C/P
You might want to do a factory reset straight through the console on the device. If what everybody else says doesn't work, try the following.
1) Unplug the power from your device but keep the HDMI in.
2) Get a pin or toothpick or something and press and hold the small reset button next to the power on the back of your box.
3) Hold the button for 10 seconds and while holding the button down, put the power plug back in.
4) Continue to hold the button for another 5 seconds and then let go of the button.
5) The box will reboot into console mode and from here you will select factory data reset.
6) Let the box reboot and now any software issues should be gone. If you for some reason load into the same screen, click the normal boot up which is the first option.
7) Your box should now work just fine.
Last edited: