Authentication issue with PVR Stalker NFPS

[sowen91]

I keep getting the error device mismatched id when I try and link the epg

 

[big dady]

You need to use 00:1A:78 not 79 for mac address

 

[sowen91]

I am using the stalker PVR add-on and it says to use the last 3 hexidecimals groups linked to your donation. When I add these hexidecimals numbers in I either get a authentication error or the device ID mismatched

 

[dara]

I am using the stalker PVR add-on and it says to use the last 3 hexidecimals groups linked to your donation. When I add these hexidecimals numbers in I either get a authentication error or the device ID mismatched

If the MAC you linked to your donation starts with "00:1A:79" instead of "00:1A:78", you will get that error. So, just go into the donation checker and make that change.

 

[sowen91]

My donation starts with 00:1A:78

 

[dara]

Are you using or have used IPTV Stalker as well? Did you ever click "Send Serial Number" or ever put data in fields in PVR Stalker besides the portal url, MAC or XMLTV?

Did you clear data after disabling "LIVE TV", and made sure you disabled "Stalker Client" in the PVR Clients list?

 

[sowen91]

I have IPTV stalked installed and using it don't have serial number sending enabled, I thought I was supposed to use PVR stalker

 

[dara]

You might need a new MAC linked to your donation. Don't use iVue, and make sure you aren't using 1.2.0 for IPTV Stalker... i

 

[sowen91]

Where is the new IPTV stalker repo

 

[dara]

Where is the new IPTV stalker repo

There is no official repo for that addon. The best place to get it is posted on the site... in pretty obvious places.

 

[sowen91]

When I use the IPTV stalker 1.083 version over the 1.2 I keep getting an authentication error and am unable to access any of the server content when I use the 1.2 and check send SN it works without issues

Any admin or user help would be appreciated if in using the wrng add-on or need to reconfigure something differently

 

[Johnnymo9210]

Stalker Authentication failed.retrying? then about 10-15 seconds after it says device conflict device_id mismatch any ideas?

 

[Johnnymo9210]

i have the excat same issues as yourelf? i am runnuing the PVR stalker NFPS and am getting this error code, any fixes?

 

[Alucard]

You had send SR# enabled and once you do that your MAC and SR# are tied together. You need to disable Send SR# in the Stalker Client and then go change your MAC. The all should be good.

 

[Johnnymo9210]

You had send SR# enabled and once you do that your MAC and SR# are tied together. You need to disable Send SR# in the Stalker Client and then go change your MAC. The all should be good.

change Mac where sorry? PVR stalker NFPS or IPTV Stalker?

 

[Alucard]

You need to generate a new MAC and link it to your donation. Then you need to update the MAC in the Stalker Clients.

 

[Johnnymo9210]

You need to generate a new MAC and link it to your donation. Then you need to update the MAC in the Stalker Clients.

yea i have done all that still getting the Authentication on the PVR stalker

 

[Johnnymo9210]

authenticion failed..... device conflict_id missmatch

Can someone please help me, I have bought the IPTV and now cant get the pvr working everything is right as dara's thread, I have tried it on kodi 15.1, 15.0 and still getting the same issue, have installed and un stalled, changed my MAC address just cant get this working, can anyone please help me. Thanks

This is for the PVR Stalker NFPS 0.8.3
Running IPTV stalker 1.0.18
Kodi 15.0 isenguard

 

[Alucard]

Uninstall the stalker client

Stalker PVR Setup Instructions
1. Go to this link and generate a new MAC. hxxp://www.hellion.org.uk/cgi-bin/randmac.pl?scope=global&oui=00%3A1A%3A78&type=mult icast. Replace xx with tt.
2. Associate the new MAC with your donation. If it fails, repeat 1 and 2 until it accepts the MAC.
3. Go to Settings, Addons, PVR and select the Stalker Client.
4. Select Configure.
5. Select Portal 1
6. Enter the MAC address that you generated and linked in steps 1 & 2
7. Enter the Server Address. It can be hxxp: //portal.iptvprivateserver.tv/stalker_portal/c/ or 11.iptvprivateserver.tv Replace xx with tt.
8. Set the Time Zone your in. You can use this site to get the correct Time Zone Name: hxxps://en.wikipedia.org/wiki/List_of_tz_database_time_zones Replace xx with tt.
9. Use your donation number for both Login and password.
10. Set Guide Preference to Prefer Provider
11. Set XMLTV Scope to Remote URL.
12. Set XMLTV Remote URL to hxxp://is.gd/NFPSF Replace xx with tt.
13. Click OK to change it.
14. Go to C:\Users\<LOGIN>\AppData\Roaming\Kodi\userdata\add on_data\pvr.stalker on Windows or
/sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/addon_data/pvr.stalker on Android and open the settings.xml
15. Insure the connection_timeout value is at 60 and then save the changes.
16. Go back to Kodi and assuming you still have the Stalker Client Plugin up and enable the Stalker PVR Client. If not see step 3 to get back to it.
17. Back out to your Kodi Settings Menu and select TV/Live TV and enable the Live TV.

This should start the PVR Stalker client. Give it a few minutes to load the guide information. Once loaded you should have a TV option on your main menu (Skin Dependent).
Select it to watch TV. You should also have a sub menu under that for the EPG.

 

[dvbken]

if at anytime you set 'device_id' or 'device_id2' in IPTV stalker, then the mac address that you used is also tied to those device_ids.

if you're using a mag stb you currently can't use "Stalker Client NFPS", because the mac address is always prefixed to 00:1A:78. while the mag uses 00:1A:79.

you have three options to fix the device_id conflict:
1) change the mac address
2) get the device_ids from the IPTV stalker settings and configure "Stalker Client"'s settings to use the save device_ids
3) ask your provider to clear any device_ids associated with your mac address